Explore projects

Hardware design of Conv TTL RS485

Production and functional tests for PandABox.

More info at the Wiki page

Enumerates the capacitors in an Altium design by parsing the EDIF netlist and library, showing if insufficient voltage ratings are used (derating). More info at the Wiki page

This project covers the hardware development of the White Rabbit switch.

Gateware for Beam Position Monitor, including digital signal processing chains, data acquisition engines, ADC and analog front-end peripherals control/monitoring, timing and control system interface.

Gateware (HDL design) for MasterFIP.

GTS is a tool which takes a binary for a given microprocessor (initially an LM32) and gives information about worst-case execution time.

Hardware designs for ROBIN-NP project.

4-channel 16-bit 130 MS/s (700 MHz analog input bandwidth) ADC (LTC2208) FMC module.

This project covers all efforts geared to standardize White Rabbit, with a view to providing a stable specification which everyone can use to build compliant products.

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

A project to host all software and hardware developments related to testing the White Rabbit switch.

Motor driver to control stepper and DC brushed motors in constant current or speed control. Used in SAMbuCa project. More info at the Wiki page

DIOT reliability studies files and reports. More info at the Wiki page

FmcDIO32chTTLa is a 32-bit port digital IO card in FMC form-factor. More info at the Wiki page

FMC HPC PT100 temperature sensor interface card. Allows connection of 15 sensors in a 4-wire configuration. Used in SAMbuCa project. More info at the Wiki page

Specific applications of open hardware modules are subprojects of this project. These subprojects contain specific firmware and/or software for existing hardware projects.

READ-ONLY PROJECT TO PRESERVE EXISTING REMOTE URLS

A High Pin Count FMC carrier in VXS format with two Virtex 5 FPGAs plus a DSP on board.

PC/104 modules. PC/104 (or PC104) is a family of embedded computer standards which define both form factors and computer buses. The standard is modular, and allows to stack together boards from a variety of COTS manufacturers to produce a customized embedded system. The designs are in sub-projects.