... | @@ -76,9 +76,10 @@ propagate this timing information to WR Slave: |
... | @@ -76,9 +76,10 @@ propagate this timing information to WR Slave: |
|
|
|
|
|
8\. Finally, on your Slave SPEC you can use the LEMO no.1 connector on
|
|
8\. Finally, on your Slave SPEC you can use the LEMO no.1 connector on
|
|
the DIO FMC to get the 1-PPS output signal and compare it with the one
|
|
the DIO FMC to get the 1-PPS output signal and compare it with the one
|
|
fed into the WR Master to check the quality of WR synchronization.
|
|
fed into the WR Master to check the quality of WR
|
|
|
|
synchronization.
|
|
|
|
|
|
\[photo here\]
|
|
![](/uploads/1a27d5d3f7fa07d03bbc4d7278b7fa5c/slave_lemo.png)
|
|
|
|
|
|
You can also use the GUI available from WRPC Shell to monitor the satus
|
|
You can also use the GUI available from WRPC Shell to monitor the satus
|
|
of WR Slave synchronization:
|
|
of WR Slave synchronization:
|
... | | ... | |