... | @@ -104,8 +104,7 @@ The Tx record contains the following fields: |
... | @@ -104,8 +104,7 @@ The Tx record contains the following fields: |
|
* `mac_local` - local MAC address. Leave at 0 when using with the WR
|
|
* `mac_local` - local MAC address. Leave at 0 when using with the WR
|
|
MAC/Core, as it will insert its own source MAC.
|
|
MAC/Core, as it will insert its own source MAC.
|
|
|
|
|
|
* `mac_target` / `mac_remote` - Destination MAC address on Tx module,
|
|
* `mac_target` - Destination MAC address from Tx module.
|
|
source MAC address for Rx module.
|
|
|
|
|
|
|
|
* `ethertype` - Ethertype of streamer frames. Default value is
|
|
* `ethertype` - Ethertype of streamer frames. Default value is
|
|
accepted by the standard configuration of the [WR PTP Core](/Wrpc-core).
|
|
accepted by the standard configuration of the [WR PTP Core](/Wrpc-core).
|
... | @@ -114,8 +113,28 @@ accepted by the standard configuration of the [WR PTP Core](/Wrpc-core). |
... | @@ -114,8 +113,28 @@ accepted by the standard configuration of the [WR PTP Core](/Wrpc-core). |
|
|
|
|
|
* `qtag_vid` - The ID of the VLAN used to tag.
|
|
* `qtag_vid` - The ID of the VLAN used to tag.
|
|
|
|
|
|
* `qtag_prio` - Tagging
|
|
* `qtag_prio` - Tagging priority.
|
|
priority.
|
|
|
|
|
|
The Rx record contains:
|
|
|
|
|
|
|
|
* `mac_local` - Same description as in Tx.
|
|
|
|
|
|
|
|
* `mac_remote` - Source MAC address to Rx module.
|
|
|
|
|
|
|
|
* `ethertype` - Same description as in Tx.
|
|
|
|
|
|
|
|
* `accept_broadcasts` - This is set to 1 if Rx must accept all
|
|
|
|
broadcast packets, otherwise clear in order to accept only unicast
|
|
|
|
packets.
|
|
|
|
|
|
|
|
* `filter_remote` - Filtering source MAC adress of streamer frames on
|
|
|
|
reception. 1 To accept packets from any source. 0 to accept only those
|
|
|
|
from device specified in `mac_remote`.
|
|
|
|
|
|
|
|
* `fixed_latency` - Latency on reception can be configured to a fixed
|
|
|
|
value. The receiver does not output received data until desired latency
|
|
|
|
has ellapsed. Set to 0 for output on request (regardless of
|
|
|
|
latency).
|
|
|
|
|
|
### **WR timing input (optional, to allow latency measurement, Tx and Rx Streamer):**
|
|
### **WR timing input (optional, to allow latency measurement, Tx and Rx Streamer):**
|
|
|
|
|
... | | ... | |