... | @@ -21,20 +21,8 @@ A: You mainly get two things: |
... | @@ -21,20 +21,8 @@ A: You mainly get two things: |
|
|
|
|
|
### Q: When connecting the GPS-PPS or the 10 MHz GPS clock to the WhiteRabbit Switch, do I have to change/configure anything?
|
|
### Q: When connecting the GPS-PPS or the 10 MHz GPS clock to the WhiteRabbit Switch, do I have to change/configure anything?
|
|
|
|
|
|
A: It's really easy:
|
|
A: Yes, it is documented
|
|
|
|
[https://www.ohwr.org/project/white-rabbit/uploads/ae3282acd8f9f6c5a9067b061202277d/wr_external_reference.pdf).
|
|
1. Skip points 2-4 if there is no TAI/UTC needed (only frequency/PPS
|
|
|
|
reference)
|
|
|
|
2. Configure your GPS receiver to send GPRMC messages every second to
|
|
|
|
its' serial port
|
|
|
|
3. Configure the serial port in the GPS to 115200 kbps, 8N1 and connect
|
|
|
|
it to the switch (you may need a null-modem cable)
|
|
|
|
4. Uncomment the line "use\_nmea = 1" in /wr/etc/wrsw\_hal.conf in the
|
|
|
|
switch
|
|
|
|
5. Connect PPS and 10 MHz to the appropriate inputs of the switch
|
|
|
|
6. Change mode parameter in timing section in /wr/etc/wrsw\_hal.conf to
|
|
|
|
"GrandMaster"
|
|
|
|
7. Reboot the switch.
|
|
|
|
|
|
|
|
-----
|
|
-----
|
|
|
|
|
... | | ... | |