... | @@ -8,12 +8,15 @@ To benefit from the new features of V2.0 gateware, the SVEC Production |
... | @@ -8,12 +8,15 @@ To benefit from the new features of V2.0 gateware, the SVEC Production |
|
Test System must be modified to flash the new version of the bootloader.
|
|
Test System must be modified to flash the new version of the bootloader.
|
|
The update procedure goes as follows:
|
|
The update procedure goes as follows:
|
|
|
|
|
|
- download the V2.0 bootloader bitstream in Xilinx .BIT format
|
|
- download the PTS patch
|
|
[here](https://www.ohwr.org/project/svec/uploads/bbb9abcd3ccc8047aa748fb0a8a9d2b9/svec-bootloader-v2-20140207.bit)
|
|
[here](https://www.ohwr.org/project/svec/uploads/a3d68359b29e668645da12c2ca2b9a15/svec-pts-update-v2014.04.tar.gz)
|
|
- replace the old bitstream in the PTS firmware directory with the new
|
|
. The patch contains the new bootloader bitstream as well as some
|
|
one, keeping the original name (case -sensitive). Assuming that you
|
|
important fixes to the PTS software that are necessary to work with
|
|
are in the home directory of the PTS machine:
|
|
the new bootloader.
|
|
|
|
- put the archive in the /home/pts directory on the SVEC PTS laptop
|
|
`pts:~$ cp svec-bootloader-v2-20140207.bit
|
|
(e.g. through an USB drive)
|
|
pts/test/svec/firmwares/SystemFPGA/svec_bootloader.bit`
|
|
- unpack the archive by running the following command: `tar xzf
|
|
|
|
svec-pts-update-v2014.04.tar.gz`
|
|
|
|
- run the PTS on a card that is known to work to check if everything
|
|
|
|
is OK.
|
|
|
|
|