... | @@ -5,12 +5,9 @@ |
... | @@ -5,12 +5,9 @@ |
|
The FMC PCIe Carrier is an FMC carrier that can hold one FMC card and an
|
|
The FMC PCIe Carrier is an FMC carrier that can hold one FMC card and an
|
|
SFP connector. On the PCIe side it has a 4-lane interface, while the FMC
|
|
SFP connector. On the PCIe side it has a 4-lane interface, while the FMC
|
|
mezzanine slot uses a low-pin count connector. This board is optimised
|
|
mezzanine slot uses a low-pin count connector. This board is optimised
|
|
for cost and will be usable with most of the FMC cards designed within
|
|
for cost and is usable with most of the FMC cards designed within the
|
|
the OHR project (e.g. ADC cards, Fine Delay). For boards needing more
|
|
OHR project (e.g. ADC cards, Fine Delay). The board is [commercially
|
|
possibilities (e.g. programmable clock resources, fast SRAM, fast
|
|
available](https://www.ohwr.org/project/spec/wiki#commercial-producers).
|
|
interconnect between carriers), the [FMC PCIe
|
|
|
|
Carrier](https://www.ohwr.org/project/fmc-pci-carrier) or its [VME
|
|
|
|
counter part](https://www.ohwr.org/project/svec) can be used.
|
|
|
|
|
|
|
|
Other FMC projects and the FMC standard are described in [FMC
|
|
Other FMC projects and the FMC standard are described in [FMC
|
|
Projects](https://www.ohwr.org/project/fmc-projects).
|
|
Projects](https://www.ohwr.org/project/fmc-projects).
|
... | | ... | |