... | @@ -65,9 +65,10 @@ applying the fitting. By doing this, we unfortunately loose some SNR |
... | @@ -65,9 +65,10 @@ applying the fitting. By doing this, we unfortunately loose some SNR |
|
(Signal to Noise Ratio) points. We tried to increase the amplifier gain
|
|
(Signal to Noise Ratio) points. We tried to increase the amplifier gain
|
|
to have increase the SNR of the points in the used frame.
|
|
to have increase the SNR of the points in the used frame.
|
|
Unfortunatelly, this saturates the ADC. As its recovery time is
|
|
Unfortunatelly, this saturates the ADC. As its recovery time is
|
|
relatively long, the non linearities decrease the results.
|
|
relatively long, the non linearities decrease the
|
|
|
|
results.
|
|
|
|
|
|
/4747
|
|
![](/uploads/e5208ef5c1f2245a5641234f6d7cc887/pulseBeginning.PNG)
|
|
*Figure 2 - Distorrtion at the beginning of the pulse. Resolution is
|
|
*Figure 2 - Distorrtion at the beginning of the pulse. Resolution is
|
|
20ns/DIV on the x axis and 227 mV/DIV on the y axis*
|
|
20ns/DIV on the x axis and 227 mV/DIV on the y axis*
|
|
|
|
|
... | | ... | |