No commit message

Home.md

@@ -51,7 +51,7 @@ design (Exploder, VETAR or SCUv2), read how to
 [Flash-an-Altera-device](Flash-an-Altera-device) and for the SPEC
 [Flash-a-Xilinx-device](Flash-a-Xilinx-device).
 
-## **PCI express-based FECs**
+### PCI express-based FECs
 
 To use these FECs, you will either need to setup a host system to
 communicate over PCI express or control them over the network using the
@@ -63,14 +63,14 @@ using PCI express. If using a SCUv2, you will need to
 [Setup-an-SCU-Bootstick](Setup-an-SCU-Bootstick) to get the ComExpress
 board running.
 
-## **VME-based FECs**
+### VME-based FECs
 
 To use these FEC, [VETAR](VETAR) you will either need to setup a VME
 system or control them over the network using the data master. Follow
 the directions to [Configure-a-Data-Master](Configure-a-Data-Master) to
 setup a system which can control FECs over the network.
 
-## **Stand-Alone FECs**
+### Stand-Alone FECs
 
 This FEC, [EXPLODER](EXPLODER), is an autonomous card with multiple I/O
 possibilities. It doesn't need any system setup.