Skip to content

Home · Changes

Page history
No commit message authored by Cesar Prados's avatar Cesar Prados 
No commit message
Hide whitespace changes
Inline Side-by-side
Home.md
View page @ e2e113fa
...@@ -51,17 +51,34 @@ design (Exploder, VETAR or SCUv2), read how to ...@@ -51,17 +51,34 @@ design (Exploder, VETAR or SCUv2), read how to
[Flash-an-Altera-device](Flash-an-Altera-device) and for the SPEC [Flash-an-Altera-device](Flash-an-Altera-device) and for the SPEC
[Flash-a-Xilinx-device](Flash-a-Xilinx-device). [Flash-a-Xilinx-device](Flash-a-Xilinx-device).
### PCI express-based FECs ### PCI express-based FECs
To use these FECs, you will either need to setup a host system to communicate over PCI express or control them over the network using the data master. Follow the directions to [Configure-a-Data-Master](Configure-a-Data-Master) to setup a system which can control FECs over the network. If using a SPECv4 card, you will need to [Configure-a-SPEC-host](Configure-a-SPEC-host) for access using PCI express. If using a SCUv2, you will need to [Setup-an-SCU-Bootstick](Setup-an-SCU-Bootstick) to get the ComExpress board running.
### VME-based FECs To use these FECs, you will either need to setup a host system to
To use these FEC, [VETAR](VETAR) you will either need to setup a VME system or control them over the network using the data master. Follow the directions to [Configure-a-Data-Master](Configure-a-Data-Master) to setup a system which can control FECs over the network. communicate over PCI express or control them over the network using the
data master. Follow the directions to
[Configure-a-Data-Master](Configure-a-Data-Master) to setup a system
which can control FECs over the network. If using a SPECv4 card, you
will need to [Configure-a-SPEC-host](Configure-a-SPEC-host) for access
using PCI express. If using a SCUv2, you will need to
[Setup-an-SCU-Bootstick](Setup-an-SCU-Bootstick) to get the ComExpress
board running.
### Stand-Alone FECs ### VME-based FECs
This FEC, [EXPLODER](EXPLODER), is an autonomous card with multiple I/O possibilities. It doesn't need any system setup.
### White Rabbit Console To use these FEC, [VETAR](VETAR) you will either need to setup a VME
All FEC devices include a [White-Rabbit-Console](White-Rabbit-Console) which you can use to debug the device. system or control them over the network using the data master. Follow
the directions to [Configure-a-Data-Master](Configure-a-Data-Master) to
setup a system which can control FECs over the network.
### Stand-Alone FECs
This FEC, [EXPLODER](EXPLODER), is an autonomous card with multiple I/O
possibilities. It doesn't need any system setup.
### White Rabbit Console
All FEC devices include a [White-Rabbit-Console](White-Rabbit-Console)
which you can use to debug the device.
# Wishbone Timing devices # Wishbone Timing devices
......