... | @@ -52,15 +52,13 @@ and for the SPEC [Flash-a-Xilinx-device](Flash-a-Xilinx-device). |
... | @@ -52,15 +52,13 @@ and for the SPEC [Flash-a-Xilinx-device](Flash-a-Xilinx-device). |
|
|
|
|
|
To use the FECs, you will either need to setup a host system to
|
|
To use the FECs, you will either need to setup a host system to
|
|
communicate over PCI express or control them over the network using the
|
|
communicate over PCI express or control them over the network using the
|
|
data master. See
|
|
data master. Follow the directions to
|
|
[Configuring-the-Data-Master](Configuring-the-Data-Master) to setup a
|
|
[Configure-a-Data-Master](Configure-a-Data-Master) to setup a system
|
|
system which can control FECs over the network. To configure a host
|
|
which can control FECs over the network. If using a SPECv4 card, you
|
|
system
|
|
will need to [Configure-a-SPEC-host](Configure-a-SPEC-host) for access
|
|
|
|
using PCI express. If using a SCUv2, you will need to
|
|
program flash
|
|
[Setup-an-SCU-Bootstick](Setup-an-SCU-Bootstick) to get the ComExpress
|
|
configure a data master = BOOTP server
|
|
board running.
|
|
|
|
|
|
(optional) configure host system--linux or SCU
|
|
|
|
|
|
|
|
# Interfaces
|
|
# Interfaces
|
|
|
|
|
... | | ... | |