Skip to content

F
FMC TDC 1ns 5cha - Software
Commit 02a2d342 authored by Federico Vaga's avatar Federico Vaga
Browse files
Options

kernel: remove unused variable 

Signed-off-by: Federico Vaga's avatarFederico Vaga <federico.vaga@cern.ch>
parent ef46eaff
Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 6 deletions
kernel/ft-core.c
View file @ 02a2d342
...@@ -187,7 +187,6 @@ int ft_probe(struct fmc_device *fmc) ...@@ -187,7 +187,6 @@ int ft_probe(struct fmc_device *fmc)
struct device *dev = fmc->hwdev; struct device *dev = fmc->hwdev;
char *fwname; char *fwname;
int i, index, ret, ord; int i, index, ret, ord;
signed long addr;
ft = kzalloc(sizeof(struct fmctdc_dev), GFP_KERNEL); ft = kzalloc(sizeof(struct fmctdc_dev), GFP_KERNEL);
if (!ft) { if (!ft) {
......
kernel/ft-irq.c
View file @ 02a2d342
...@@ -58,7 +58,6 @@ int ft_read_sw_fifo(struct fmctdc_dev *ft, int channel, ...@@ -58,7 +58,6 @@ int ft_read_sw_fifo(struct fmctdc_dev *ft, int channel,
uint32_t *v; uint32_t *v;
struct ft_wr_timestamp ts; struct ft_wr_timestamp ts;
struct ft_channel_state *st; struct ft_channel_state *st;
unsigned long flags;
int ret; int ret;
st = &ft->channels[channel - 1]; st = &ft->channels[channel - 1];
......
kernel/ft-spec.c
View file @ 02a2d342
...@@ -20,8 +20,6 @@ ...@@ -20,8 +20,6 @@
static int ft_spec_reset(struct fmctdc_dev *ft) static int ft_spec_reset(struct fmctdc_dev *ft)
{ {
struct spec_dev *spec = (struct spec_dev *)ft->fmc->carrier_data;
/* it takes a while for the PLL to bootstrap.... or not! /* it takes a while for the PLL to bootstrap.... or not!
We have no possibility to check, as the PLL status register is driven We have no possibility to check, as the PLL status register is driven
by the clock from this PLL :( */ by the clock from this PLL :( */
......
kernel/ft-svec.c
View file @ 02a2d342
...@@ -22,8 +22,6 @@ ...@@ -22,8 +22,6 @@
static int ft_svec_reset(struct fmctdc_dev *ft) static int ft_svec_reset(struct fmctdc_dev *ft)
{ {
unsigned long tmo;
/* FIXME: An UGLY hack: ft_svec_reset() executed on slot 0 /* FIXME: An UGLY hack: ft_svec_reset() executed on slot 0
(first mezzanine to be initialized) resets BOTH cards. The reason is (first mezzanine to be initialized) resets BOTH cards. The reason is
that we need both mezzanines PLLs running to read the entire that we need both mezzanines PLLs running to read the entire
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment