... | @@ -43,7 +43,7 @@ Overview of specifications of CERN developments at |
... | @@ -43,7 +43,7 @@ Overview of specifications of CERN developments at |
|
|
|
|
|
- [FmcAdc100M14b4cha: 100 MSPS, 14 bits, 4
|
|
- [FmcAdc100M14b4cha: 100 MSPS, 14 bits, 4
|
|
channel](https://www.ohwr.org/project/fmc-adc-100m14b4cha) (CERN
|
|
channel](https://www.ohwr.org/project/fmc-adc-100m14b4cha) (CERN
|
|
BE/CO) - prototype produced
|
|
BE/CO) - prototype ready (June 2010)
|
|
- Users
|
|
- Users
|
|
- BPM Linac4. To be used on VME carrier (CERN BE/BI, L.Soby,
|
|
- BPM Linac4. To be used on VME carrier (CERN BE/BI, L.Soby,
|
|
M.Sordet 1st beam end 2010)
|
|
M.Sordet 1st beam end 2010)
|
... | @@ -83,7 +83,10 @@ Overview of specifications of CERN developments at |
... | @@ -83,7 +83,10 @@ Overview of specifications of CERN developments at |
|
- 50 Ohm DC-coupled, 70dBFS dynamic range, ENOB ~12, 40MHz analog
|
|
- 50 Ohm DC-coupled, 70dBFS dynamic range, ENOB ~12, 40MHz analog
|
|
bandwidth, +/-1V, gain selectable: 0dB/+24dB, thermal offset
|
|
bandwidth, +/-1V, gain selectable: 0dB/+24dB, thermal offset
|
|
drift compensation.
|
|
drift compensation.
|
|
- two low jitter clock inputs and two data clock outputs.
|
|
- Two low jitter clock inputs and two data clock outputs.
|
|
|
|
- Design data: [EDMS
|
|
|
|
EDA-02068](https://edms.cern.ch/nav/eda-02068).
|
|
|
|
- PCB layout ready (June 2010).
|
|
- *Needs carrier with HPC connector.*
|
|
- *Needs carrier with HPC connector.*
|
|
|
|
|
|
<!-- end list -->
|
|
<!-- end list -->
|
... | @@ -102,8 +105,7 @@ Overview of specifications of CERN developments at |
... | @@ -102,8 +105,7 @@ Overview of specifications of CERN developments at |
|
<!-- end list -->
|
|
<!-- end list -->
|
|
|
|
|
|
- FmcDac4ch16b125MSPS, 4 channel, 16 bit, 125 MSPS DAC (CERN BE/RF,
|
|
- FmcDac4ch16b125MSPS, 4 channel, 16 bit, 125 MSPS DAC (CERN BE/RF,
|
|
P.M. Leinonen), schematics ready (April 2010), PCB layout ready
|
|
P.M. Leinonen), schematics ready (April 2010)
|
|
(June 2010)
|
|
|
|
- 40 MHz analog BW, AC-coupled, 50 Ohm, 2Vpp or 2Vpp/16 output,
|
|
- 40 MHz analog BW, AC-coupled, 50 Ohm, 2Vpp or 2Vpp/16 output,
|
|
4xSMC, clock generated on MDDS mezzanine output on SMC.
|
|
4xSMC, clock generated on MDDS mezzanine output on SMC.
|
|
- *Needs carrier with HPC connector.*
|
|
- *Needs carrier with HPC connector.*
|
... | @@ -120,20 +122,24 @@ Overview of specifications of CERN developments at |
... | @@ -120,20 +122,24 @@ Overview of specifications of CERN developments at |
|
(implementation)
|
|
(implementation)
|
|
- [Time intervals measurements and generation methods
|
|
- [Time intervals measurements and generation methods
|
|
review](https://www.ohwr.org/project/fmc-projects/wikis/Documents/Time-intervals-measurements-and-generation-methods-review), P.Alvarez, 2008
|
|
review](https://www.ohwr.org/project/fmc-projects/wikis/Documents/Time-intervals-measurements-and-generation-methods-review), P.Alvarez, 2008
|
|
- User: E. Carlier (TE/ABT), 1 ns resolution, may use [16-channel
|
|
- Users
|
|
TTL I/O](https://www.ohwr.org/project/fmc-dio-16chttla) for I/O
|
|
- E. Carlier (TE/ABT), 1 ns resolution, may use [16-channel
|
|
or NIM input?
|
|
TTL I/O](https://www.ohwr.org/project/fmc-dio-16chttla) for
|
|
- User: A. Boccardi (BE/BI, Synchrotron light monitor), 50 ps
|
|
I/O or NIM input?
|
|
|
|
- A. Boccardi (BE/BI, Synchrotron light monitor), 50 ps
|
|
resolution, likely another design requiring other front-end.
|
|
resolution, likely another design requiring other front-end.
|
|
|
|
|
|
#### Fine Delay module
|
|
#### Fine Delay module
|
|
|
|
|
|
- FMC7: To be designed (CERN BE/CO) by June 2010 for TE/ABT
|
|
- [FMC-Delay-1ns-8cha: 8 channel, 1 ns
|
|
- ideas
|
|
resolution](https://www.ohwr.org/project/fmc-delay-1ns-8cha) (CERN
|
|
- http://gkasprow.selfip.com/~pkasprow/Creotech/products.pdf
|
|
BE/CO) - Under design (June 2010)
|
|
(page 5)
|
|
- ideas:
|
|
- Users: TE/ABT: Carlier, CTF3: E.Said (now uses VME board)
|
|
http://gkasprow.selfip.com/~pkasprow/Creotech/products.pdf (page
|
|
- 25ns - 100ms, 0.1ns accuracy
|
|
5)
|
|
|
|
- Users
|
|
|
|
- TE/ABT: Carlier
|
|
|
|
- CTF3: E.Said (now uses VME board)
|
|
|
|
|
|
-----
|
|
-----
|
|
|
|
|
... | @@ -172,8 +178,8 @@ The FMC standard refers to other standards for the EEPROM data: |
... | @@ -172,8 +178,8 @@ The FMC standard refers to other standards for the EEPROM data: |
|
|
|
|
|
### FMC components
|
|
### FMC components
|
|
|
|
|
|
- [Front-panels - XTech, Part no.
|
|
- [Front-panels - XTech, Part no. XFM85-0001 (10mm
|
|
XFM85-0001](http://www.xtech-outside.com/products/atca_amc_fp.html)
|
|
height)](http://www.xtech-outside.com/products/atca_amc_fp.html)
|
|
- [AdvancedMC FMC Bezels and Faceplates Product
|
|
- [AdvancedMC FMC Bezels and Faceplates Product
|
|
catalog](http://www.xtech-outside.com/products/catalogs/AMC_Bezels.pdf)
|
|
catalog](http://www.xtech-outside.com/products/catalogs/AMC_Bezels.pdf)
|
|
- [Example order - CERN
|
|
- [Example order - CERN
|
... | | ... | |