... | ... | @@ -12,18 +12,20 @@ project. |
|
|
[Bottom view of the masterFIP
|
|
|
board](https://www.ohwr.org/project/fmc-masterfip/uploads/8363de65c8dd486f2ecf645966192dac/masterFIP_backside.png)
|
|
|
|
|
|
The main components of the FMC-masterFIP board are: the
|
|
|
[FielDrive](https://www.ohwr.org/project/cern-fip/wikis/FielDrive) bus
|
|
|
driver and
|
|
|
The main components of the FMC-masterFIP board are:
|
|
|
|
|
|
- The
|
|
|
[FielDrive](https://www.ohwr.org/project/cern-fip/wikis/FielDrive)
|
|
|
bus driver and
|
|
|
[FieldTR](https://www.ohwr.org/project/cern-fip/wikis/FieldTR)
|
|
|
transformer, both developed and sold by the company
|
|
|
insulating transformer, both developed and sold by the company
|
|
|
[Alstom](http://www.alstom.com/).
|
|
|
A Lemo-0 connector on the board is used for the reception of an input
|
|
|
- A Lemo-0 connector, optionally used for the reception of an input
|
|
|
synchronization trigger pulse, usually from CERN's timing board
|
|
|
[CTRI](https://wikis.cern.ch/display/HT/CTRI+-+PCI+timing+receiver).
|
|
|
To comply with the FMC standard, the board has an EEPROM chip, loaded
|
|
|
with IPMI FRU information, and a 1-wire thermometer-unique-id-chip.
|
|
|
|
|
|
- An EEPROM chip, loaded with IPMI FRU information, and a 1-wire
|
|
|
thermometer-unique-id-chip, so as to comply with the FMC standard.
|
|
|
|
|
|
The schematics of the board, drawn in Altium, are available at CERN's
|
|
|
[EDMS](https://edms.cern.ch/project/EDA-03098). As the following table
|
|
|
shows, three versions of the board have been designed.
|
... | ... | @@ -197,5 +199,8 @@ designer - CERN |
|
|
|
|
|
-----
|
|
|
|
|
|
Matthieu Cattin, Eva Gousiou, Erik van der Bij, 18 February 2016
|
|
|
-----
|
|
|
|
|
|
\_
|
|
|
Matthieu Cattin, Eva Gousiou, Erik van der Bij, 07 March 2017\_
|
|
|
|