... | @@ -6,16 +6,16 @@ high. |
... | @@ -6,16 +6,16 @@ high. |
|
|
|
|
|
![](/uploads/140e7ddf0fadb587fb9ae88714f54335/sine_no_filter.jpg)
|
|
![](/uploads/140e7ddf0fadb587fb9ae88714f54335/sine_no_filter.jpg)
|
|
|
|
|
|
As you can see, the second harmonics is only 50 dB below the first
|
|
As you can see, the second harmonics is only 55 dB below the first
|
|
harmonic level. The sine wave source was the Rhode & Schwartz SML01
|
|
harmonic level. The sine wave source was the Rhode & Schwartz SML01
|
|
generator - expensive and solid looking device. To verify, if the input
|
|
generator - expensive and solid looking device. To verify, if the input
|
|
signal is free of the harmonics, we've connected another generator from
|
|
signal is free of the harmonics, we've connected another generator from
|
|
the Agilent network analyser. Unfortunately, spectrum was looking the
|
|
the Agilent network analyser. Unfortunately, spectrum was looking the
|
|
same. We did some additional measurements, for different frequencies,
|
|
same, so the conclusion was to focus on the FmcAdc card. We did some
|
|
input voltage ranges, and signal amplitude, to find something that could
|
|
additional measurements, for different frequencies, input voltage
|
|
help us in the investigation. The observation that made us suspicious
|
|
ranges, and signal amplitude, to find something that could help us in
|
|
was the harmonics level that did not differ due to the all changes shown
|
|
the investigation. The observation that made us suspicious was the
|
|
above.
|
|
harmonics level that did not differ due to the all changes shown above.
|
|
|
|
|
|
Next step was to build filter that would suppress the harmonics, to make
|
|
Next step was to build filter that would suppress the harmonics, to make
|
|
sure that input signal is truly clean.
|
|
sure that input signal is truly clean.
|
... | @@ -31,8 +31,8 @@ signal. |
... | @@ -31,8 +31,8 @@ signal. |
|
![](/uploads/40183edda830c26609c83dfec4912084/P1040720.JPG)
|
|
![](/uploads/40183edda830c26609c83dfec4912084/P1040720.JPG)
|
|
|
|
|
|
Marker at the second harmonics. Filter's attenuation at this frequency
|
|
Marker at the second harmonics. Filter's attenuation at this frequency
|
|
is
|
|
is 46 dB (-3 dB for the base signal
|
|
44dB.
|
|
frequency).
|
|
![](/uploads/0c8296bbd8c6e74dc2cc9daabb13448f/P1040721.JPG)
|
|
![](/uploads/0c8296bbd8c6e74dc2cc9daabb13448f/P1040721.JPG)
|
|
|
|
|
|
SUCCESS\!\!\! FFT of the filtred signal indicates the second harmonics
|
|
SUCCESS\!\!\! FFT of the filtred signal indicates the second harmonics
|
... | | ... | |