... | ... | @@ -4,7 +4,7 @@ |
|
|
|
|
|
- Replace GND connection screw with **butterfly** type
|
|
|
|
|
|
- Add to the crate design optional **roof and feet**; an example shown here:
|
|
|
- Add to the crate design **optional roof and feet**; an example shown here:
|
|
|
|
|
|
![cryo-crate1](uploads/192b2d4938f2be8e0e6257033245e8b4/cryo-crate1.png) ![cryo-crate2](uploads/8eb44abee935fe744d328ab04421ca6d/cryo-crate2.png)
|
|
|
|
... | ... | @@ -18,13 +18,13 @@ It seems there are only red rails for RTMs, to be confirmed; ideally they should |
|
|
|
|
|
![rails](uploads/b91ab6374189080f14444047f4332803/rails.jpg)
|
|
|
|
|
|
- Parts to keep cables together will be added, either off-the-shelf or 3D printed
|
|
|
- Parts to keep **cables together** will be added, either off-the-shelf or 3D printed
|
|
|
|
|
|
- Autodesk model browser to have descriptive names, not just part numbers, if possible
|
|
|
- Autodesk model browser to have **descriptive names**, not just part numbers, if possible
|
|
|
|
|
|
- Creotech waiting for Schroff answer on painting options and 6HP RTM front-panel availability
|
|
|
- Creotech waiting for Schroff answer on **painting** options and 6HP RTM front-panel availability
|
|
|
|
|
|
- CERN will provide a number on the allowed cable drop on 12V cables, 50A
|
|
|
- CERN will provide a number on the allowed cable **voltage drop** on 12V cables, 50A
|
|
|
|
|
|
- CERN will provide **STEP models** of the front panels of the system and peripheral boards and model of the FMC-nanoFIP
|
|
|
|
... | ... | |