0x24 & 0x00000000& TVLR & Time Value Low Register\\
0x28 & 0x00000000& TVHR & Time Value High Register\\
0x2c & 0x00000000& TBMR & Tag Buffer Meta Register\\
0x30 & 0x00000000& TBCYR & Tag Buffer Cycles Register\\
0x34 & 0x00000000& TBTLR & Tag Buffer TAI Low Register\\
0x38 & 0x00000000& TBTHR & Tag Buffer TAI High Register\\
0x3c & 0x00020000& TBCSR & Tag Buffer Control and Status Register\\
\end{longtable}
}
\noindent Note (1): The reset value of the SR cannot be specified, since it is based on the
gateware version, the state of the on-board switches and whether an RTM is plugged in or not.
\vspace{11pt}
\subsubsection{BIDR -- Board ID Register}
\label{app:conv-regs-bidr}
\vspace{11pt}
\noindent
...
...
@@ -74,6 +78,7 @@ Reset value: 0x54424c4f
\end{itemize}
\vspace{11pt}
\subsubsection{SR -- Status Register}
\label{app:conv-regs-sr}
\vspace{11pt}
\noindent
...
...
@@ -104,14 +109,14 @@ Reset value: 0x54424c4f
GWVERS
} [\emph{read-only}]: Gateware version
\\
Leftmost nibble hex value is major release decimal value \\ Rightmost nibble hex value is minor release decimal value \\ e.g. \\ 0x11 -- v1.1 \\ 0x1e -- v1.14 \\ 0x20 -- v2.0
Leftmost nibble hex value is major release decimal value \\ Rightmost nibble hex value is minor release decimal value \\ e.g. \\ 0x11 -- v1.1 \\ 0x2e -- v2.14
\end{small}
\item\begin{small}
{\bf
SWITCHES
} [\emph{read-only}]: Status of on-board switches
} [\emph{read-only}]: Status of on-board switches (see Section~\ref{sec:switches})
\\
0 -- switch is ON \\ 1 -- switch is OFF\\ bit 0 -- SW1.1 \\ bit 1 -- SW1.2 \\ ... \\ bit 4 -- SW2.1 \\ ... \\ bit 7 -- SW2.4
0 -- switch is ON \\ 1 -- switch is OFF
\end{small}
\item\begin{small}
{\bf
...
...
@@ -123,7 +128,7 @@ RTM
\item\begin{small}
{\bf
I2C\_WDTO
} [\emph{read/write}]: I2C communication watchdog timeout error
} [\emph{read/write}]: Communication watchdog timer status
\\
1 -- timeout occured \\ 0 -- no timeout \\ This bit can be cleared by writing a '1' to it