No commit message

microfip.md

@@ -8,20 +8,17 @@ company Alstom.
 ## Features
 
 MICROFIP component is an ASIC solution implementing the WorldFIP
-protocol, to be used in field devices  
-able to communicate at the three standard speeds: 31.25 kbits/s, 1
-Mbit/s, 2.5 Mbits/s. In addition its static  
-implementation guarantees low power consumption.
+protocol, to be used in field devices able to communicate at the three
+standard speeds: 31.25 kbits/s, 1 Mbit/s, 2.5 Mbits/s. In addition its
+static implementation guarantees low power consumption.
 
 MICROFIP is a low-cost and easy-to-use solution which supplies a subset
-of the WorldFIP services, in particular  
-it can be configured as a station, without being able to run the bus
-arbitrator. The frame delimiters and control  
-sequence can be selected in compliance with the NFC46-604 FIP original
-standard or IEC11586-2. Network  
-management facilities are directly embedded in the chip, such as the
-presence and identification variables. The  
-identification contains a 32-bit tag.
+of the WorldFIP services, in particular it can be configured as a
+station, without being able to run the bus arbitrator. The frame
+delimiters and control sequence can be selected in compliance with the
+NFC46-604 FIP original standard or IEC11586-2. Network management
+facilities are directly embedded in the chip, such as the presence and
+identification variables. The identification contains a 32-bit tag.
 
 The MICROFIP chip is packaged in the MQFP100 standard solution, and the
 3.3-volt and 5-volt nominal power