To be created in the coming days.
Getting Started
Setup up the switch card:
- Plug in the source measurement unit (SMU), LCR meter (LCR) and ammeter (AM) according to the figure below.
- Plug in the USB connector. The switch card should power up automatically.
Manual controls of the switch card:
- The LED display should show '---' which indicates that all channels are shorted to GND.
- The two leftmost control sticks allow to change the open channel. The default visualisation mode is the octal numeral system, i.e. the channel numbering runs from '000' to '777'. See figure below.
First tests of the card:
Channel Layout
Top and bottom View of the assembled system