TiCkS
The TiCkS board is an FMC carrier based on the SPEC. This board is usable with most of the FMC cards designed within the OHR project (e.g. ADC cards, Fine Delay). The TiCkS board provides ns time stamping for CTA camera triggers to allow search of coincidences between telescope’s events. It implements a UDP stack to send bunches of timestamps and receive configuration commands. The boards are powered by a 24 Volts DC power supply.
Boards with a very similar architecture are available for the VME bus
(SVEC - Simple VME FMC Carrier
(SVEC)) and for the PXI
Express bus (SPEXI - Simple PXI express FMC Carrier Board
(SPEXI)).
Other FMC projects and the FMC standard are described in FMC
Projects.
Here is the TiCkS with its “CTA Interface”, consisting of 2x RJ45 connectors (at the left). For the OHW version, this will be replaced by an FMC connector for greater flexibility.
Contact
Tags
FMC White Rabbit WR Node FMC Carrier TDCCompatible Projects
White Rabbit Switch - Hardware
White Rabbit Switch is an open hardware design of an 18-ports Ethernet switch licensed under CERN OHL 1.2
White Rabbit Switch - Hardware V4
This project describes the development of the hardware of the White Rabbit Switch version 4 (WRS-v4)
WRS Fan-less hardware
The White Rabbit Switch is the central element of a White Rabbit network and was designed as a part of the White Rabbit project
WRS with low jitter logic integrated
The White Rabbit Switch Low Jitter (WRS-3-LJ/18) is a new version of the White Rabbit Switch which counts with a series of improvements that enable its use in more demanding time and frequency distribution applications
WRS-318 with LJD prepared hardware
An 18-port White Rabbit switch V3.4 that is prepared for the Low-Jitter Daughterboard