Commit 31c0bdea authored by Tristan Gingold's avatar Tristan Gingold

doc/: document fdx2 and tdcx2

parent a71eb6d4
......@@ -15,9 +15,13 @@ Currently these include:
WRTD.
#. :ref:`svec_ref_tdc_fd`: A pulse-in/pulse-out WRTD Node in VME format, for generic trigger
distribution applications.
#. :ref:`svec_ref_tdc_x2`: A pulse-in WRTD Node in VME format.
#. :ref:`svec_ref_fd_x2`: A pulse-out WRTD Node in VME format.
.. toctree::
:hidden:
ref_spec_fmc_adc
ref_svec_tdc_fd
ref_svec_tdc_x2
ref_svec_fd_x2
.. Copyright (c) 2019 CERN (home.cern)
SPDX-License-Identifier: CC-BY-SA-4.0
.. _svec_ref_fd_x2:
SVEC-based FD x 2
=================
This is a WRTD :ref:`node` based on the `Simple VME FMC Carrier (SVEC)
<https://www.ohwr.org/project/svec/wikis/home>`_ and the `FMC Fine Delay generator
(FMC-FD) <https://www.ohwr.org/project/fmc-delay-1ns-8cha/wikis/home>`_.
The basic principle of this :ref:`node` is simple: the :ref:`node`
also receives WRTD :ref:`Messages <message>` which are then used to
generate pulses at a predefined moment on one of the FMC-FD outputs.
Architecture and performances are similar to :ref:`svec_ref_tdc_fd`.
The node has 10 :ref:`Local Output Channels <local_channel>` are
mapped to the five inputs of each FMC-FD.
.. Copyright (c) 2019 CERN (home.cern)
SPDX-License-Identifier: CC-BY-SA-4.0
.. _svec_ref_tdc_x2:
SVEC-based TDC x 2
==================
This is a WRTD :ref:`node` based on the `Simple VME FMC Carrier (SVEC)
<https://www.ohwr.org/project/svec/wikis/home>`_ and the `FMC Time to Digital Converter (FMC-TDC)
<https://www.ohwr.org/project/fmc-tdc-1ns-5cha-hw/wikis/home>`_.
The basic principle of this :ref:`node` is simple: it takes in external pulses on its FMC-TDC
inputs, timestamps them using WR time and converts them to WRTD :ref:`Messages <message>`, to be
sent over the WR network.
Architecture and performances are similar to :ref:`svec_ref_tdc_fd`. The node has 10 :ref:`Local Input Channels <local_channel>` are mapped to the five inputs of each FMC-TDC.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment