FAQ
Can I benefit of the performance of WRS Low jiiter board when the GM is a standard one?*
No, because the noise of the standard GM is very high
Can I benefit of the performance of WRS Low jiiter board if the GM is using it but the boundary switch is a standard one?*
Yes, you will experience a 10 dB reduction of noise.
Better improvements can be achieved if
-
you cover the boundary VCTCXO (VM53S3) of RTV3140 silicone resin (hardware modification) OR
-
you increase the bandwidth of the boundary VM53S3 (software modification) with Kp=10000 and Ki=300
26 December 2016