• Dimitris Lampridis's avatar
    dev: introduce PPS mask/unmask bit in pps_gen. · 72c8d2a8
    Dimitris Lampridis authored
    By default, the bit is zero (masked), which means that PPS signal output is masked
    when the link status is not ok. This is useful to pervent spurious PPS when in
    SLAVE mode and the link goes down.
    
    When the bit is set, then a PPS is always generated (as long as the PPS valid bit
    in the ESCR register is set). This is useful in master mode.
    72c8d2a8
Name
Last commit
Last update
arch/lm32 Loading commit data...
configs Loading commit data...
dev Loading commit data...
doc Loading commit data...
host Loading commit data...
include Loading commit data...
ipc Loading commit data...
lib Loading commit data...
monitor Loading commit data...
pp_printf Loading commit data...
ppsi @ d6aefd73
scripts Loading commit data...
sdb-lib Loading commit data...
shell Loading commit data...
softpll Loading commit data...
test/snmp Loading commit data...
tools Loading commit data...
.gitignore Loading commit data...
.gitmodules Loading commit data...
COPYING Loading commit data...
Kconfig Loading commit data...
MAKEALL Loading commit data...
Makefile Loading commit data...
Makefile.kconfig Loading commit data...
bigobj.lds Loading commit data...
check-error.c Loading commit data...
compare_size.sh Loading commit data...
dump-info.c Loading commit data...
revision.c Loading commit data...
save_size.sh Loading commit data...
system_checks.c Loading commit data...
wrc_main.c Loading commit data...
wrc_main_sim.c Loading commit data...
wrs_main.c Loading commit data...