- 23 Apr, 2019 1 commit
-
-
li hongming authored
-
- 10 Dec, 2018 1 commit
-
-
li hongming authored
-
- 28 Nov, 2018 1 commit
-
-
li hongming authored
Support aligning the PPS out to PPS input when WRSFL works as GM.
-
- 19 Oct, 2018 1 commit
-
-
li hongming authored
1. Add new variable ext_pps_latency_ps in struct spll_stats, using it to get the ext_pps_latency parameter from ARM(linux). 2. Change SPLL_STATS_VER to 4, modify the related function. 3. Modify the Main PLL phase shift in GM mode according to ext_pps_lat- ency_ps. Calibration are needed if you want to align the PPS out to PPS in.
-
- 18 Oct, 2018 1 commit
-
-
li hongming authored
When WRSFL works as GM, the phase difference between pps_out and pps_in varies every time WRSFL reboots.
-
- 22 Sep, 2018 1 commit
-
-
li hongming authored
-
- 14 Sep, 2018 1 commit
-
-
li hongming authored
-
- 09 Sep, 2018 1 commit
-
-
li hongming authored
Add external AD9516 configuration. (VCXO is 25MHz) Modify softpll_ng according to the external AD9516. Bug: snmpd reports the wrong softPLL state.
-
- 21 Dec, 2016 8 commits
-
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
Mattia Rizzi authored
-
- 03 Aug, 2016 8 commits
-
-
Dimitris Lampridis authored
It does not make sense when the init is stored in flash and the board has no EEPROM. Otherwise, storage_init() calls mi2c_devprobe() if needed.
-
Dimitris Lampridis authored
-
Grzegorz Daniluk authored
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
This function can be used to discard packets with the wrong destination IP. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Grzegorz Daniluk authored
-
Grzegorz Daniluk authored
-
Grzegorz Daniluk authored
-
- 29 Jul, 2016 16 commits
-
-
Cesar Prados authored
-
Adam Wujek authored
Add the mini SNMP SNMP responder to the WRPC. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Tread as error when 0 is returned from the set_value function. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Copy the pointer even it is not used now Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Move wrpcSfpEntry and wrpcTemperatureEntry to be a part of limb not a twig. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Add support for ASN_UNSIGNED to set_value and get_value. Also return 0 if ASN not supported. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Fix problems reported by smilint (smilint lib/WR-WRPC-MIB.txt) Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Add an object to restart PTP via SNMP (wrpcPtpConfigRestart). Also don't restart ppsi after SFP updates in the flash. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
When snmpset is performed on not existing or read only OID, then response packet does not contain to-be-set value. Due to that, returning packet is shorter. It is necessary to recalculate sizes of the fields inside the response packet. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
Pass returned value from twig functions (group and table) in the response. Now setting read only values return proper error (SNMP_ERR_READONLY). Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
SNMPv1 does not support counter64. Add tests for that too. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
spec_snmp_defconfig -- config for spec with SNMP responder enabled spec_snmp_set_verbose_defconfig -- config for spec with enabled SNMP (SNMP responder, SETs, verbose), fake temperatures, SDB storage Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
"sfp detect" was incorporated into "sfp match". Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
We don't use these functions. Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-
Adam Wujek authored
We revert this commit, since we decided to support objects only from our own MIB. So we don't need this this specific time format. So, revert the commit: util: add the perverse SNMP 'string' time format Signed-off-by: Adam Wujek <adam.wujek@cern.ch>
-