Commit b711316c authored by Alessandro Rubini's avatar Alessandro Rubini

Merge branch 'kconfig'

parents 91c58a37 70eb3ba6
......@@ -13,3 +13,11 @@ tools/lm32-loader
wrc_disasm.S
wrc.ram
wrc.vhd
*.cmd
*.o
.tmp_*
.config
.config.old
include/config
include/generated
\ No newline at end of file
mainmenu "WR PTP Core software configuration"
config ETHERBONE
boolean "Compile Etherbone support in wrpc-sw"
help
This allows to run LM32 code that is aware of Etherbone.
You need to run a gateware file that includes Etherbone support.
If in doubt, say No.
# choose your board here.
BOARD = spec
# 1 enables Etherbone support
WITH_ETHERBONE=0
# and don't touch the rest unless you know what you're doing.
CROSS_COMPILE ?= lm32-elf-
......@@ -13,6 +9,8 @@ OBJDUMP = $(CROSS_COMPILE)objdump
OBJCOPY = $(CROSS_COMPILE)objcopy
SIZE = $(CROSS_COMPILE)size
-include $(CURDIR)/.config
OBJS_WRC = wrc_main.o \
wrc_ptp.o \
monitor/monitor.o
......@@ -24,7 +22,7 @@ INCLUDE_DIRS = -I$(PTP_NOPOSIX)/wrsw_hal \
-I$(PTP_NOPOSIX)/softpll \
-Iinclude
CFLAGS_EB = -DWITH_ETHERBONE=$(WITH_ETHERBONE)
CFLAGS = -include $(CURDIR)/include/generated/autoconf.h
CFLAGS_PTPD = -ffreestanding \
-DPTPD_FREESTANDING \
......@@ -66,7 +64,7 @@ include sockitowm/sockitowm.mk
include dev/dev.mk
CFLAGS = $(CFLAGS_PLATFORM) $(CFLAGS_EB) $(CFLAGS_PTPD) $(INCLUDE_DIRS) \
CFLAGS += $(CFLAGS_PLATFORM) $(CFLAGS_EB) $(CFLAGS_PTPD) $(INCLUDE_DIRS) \
-ffunction-sections -fdata-sections -Os -Iinclude \
-include include/trace.h \
$(PTPD_CFLAGS) -I$(PTP_NOPOSIX)/PTPWRd -I. -Isoftpll
......@@ -84,7 +82,7 @@ REVISION=$(shell git describe --dirty --always)
all: tools wrc
wrc: $(OBJS)
wrc: silentoldconfig $(OBJS)
echo "const char *build_revision = \"$(REVISION)\";" > revision.c
echo "const char *build_date = __DATE__ \" \" __TIME__;" >> revision.c
$(CC) $(CFLAGS) -c revision.c
......@@ -110,3 +108,13 @@ clean:
tools:
make -C tools
# following targets from Makefile.kconfig
silentoldconfig:
@mkdir -p include/config
$(MAKE) -f Makefile.kconfig $@
scripts_basic config %config:
$(MAKE) -f Makefile.kconfig $@
.config: silentoldconfig
# Do not:
# o use make's built-in rules and variables
# (this increases performance and avoids hard-to-debug behaviour);
# o print "Entering directory ...";
MAKEFLAGS += -rR --no-print-directory
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
ifdef V
ifeq ("$(origin V)", "command line")
KBUILD_VERBOSE = $(V)
endif
endif
ifndef KBUILD_VERBOSE
KBUILD_VERBOSE = 0
endif
# Cancel implicit rules on top Makefile
$(CURDIR)/Makefile Makefile: ;
# That's our default target when none is given on the command line
PHONY := _all
_all:
# SHELL used by kbuild
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
# Make variables (CC, etc...)
HOSTCC = gcc
HOSTCXX = g++
HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
HOSTCXXFLAGS = -O2
export HOSTCC HOSTCXX HOSTCFLAGS HOSTCXXFLAGS
KBUILD_KCONFIG = $(CURDIR)/Kconfig
export KBUILD_KCONFIG
srctree := $(CURDIR)
objtree := $(CURDIR)
src := $(srctree)
obj := $(objtree)
export srctree objtree
# We need some generic definitions (do not try to remake the file).
$(srctree)/scripts/Kbuild.include: ;
include $(srctree)/scripts/Kbuild.include
# Basic helpers built in scripts/
PHONY += scripts_basic
scripts_basic:
$(Q)$(MAKE) $(build)=scripts/basic
config: scripts_basic FORCE
$(Q)mkdir -p include/linux include/config
$(Q)$(MAKE) $(build)=scripts/kconfig $@
%config: scripts_basic FORCE
$(Q)$(MAKE) $(build)=scripts/kconfig $@
clean:
@find . $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name 'Module.markers' -o -name '.tmp_*.o.*' \) \
-type f -print | xargs rm -f -v
PHONY += FORCE
FORCE:
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable so we can use it in if_changed and friends.
.PHONY: $(PHONY)
#
# Automatically generated make config: don't edit
#
CONFIG_ETHERBONE=y
#
# Automatically generated make config: don't edit
#
# CONFIG_ETHERBONE is not set
......@@ -228,7 +228,7 @@ void pfilter_init_default()
pfilter_new();
pfilter_nop();
#if WITH_ETHERBONE != 0
#ifdef CONFIG_ETHERBONE
pfilter_cmp(0, 0xffff, 0xffff, MOV, 1);
pfilter_cmp(1, 0xffff, 0xffff, AND, 1);
pfilter_cmp(2, 0xffff, 0xffff, AND, 1); /* r1 = 1 when dst mac is broadcast */
......@@ -264,7 +264,7 @@ void pfilter_init_default()
pfilter_logic2(R_CLASS(0), 15, MOV, 0); /* class 0: ICMP/IP(unicast) or ARP(broadcast) or PTPv2 => PTP LM32 core */
pfilter_load();
#else
#else /* not etherbone */
pfilter_new();
pfilter_nop();
pfilter_cmp(0, 0xffff, 0xffff, MOV, 1);
......@@ -281,6 +281,6 @@ void pfilter_init_default()
pfilter_logic2(R_CLASS(7), 6, NOT, 0); /* class 7: not PTP => external fabric */
pfilter_logic2(R_CLASS(0), 6, MOV, 0); /* class 0: PTPv2 => PTP LM32 core */
pfilter_load();
#endif
#endif /* CONFIG_ETHERBONE */
}
......@@ -340,8 +340,8 @@ later during the software compilation:
Now you have everything that is needed to build the software for WRPC. Before
compilation the decision can be made whether to turn on or not the software
support for Etherbone core that is integrated inside WRPC gateware for SPEC
board. By default it is disabled but can be turned on by setting the value of
@i{WITH_ETHERBONE} variable inside the Makefile. The compilation is made by
board. By default it is disabled but can be turned on by setting the
@i{CONFIG_ETHERBONE} variable to @i{y} inside the Makefile. The compilation is made by
a simple command without any additional parameters:
@example
......
OBJS_LIB= lib/mprintf.o \
lib/util.o
ifneq ($(WITH_ETHERBONE), 0)
ifdef CONFIG_ETHERBONE
OBJS_LIB += lib/arp.o lib/icmp.o lib/ipv4.o lib/bootp.o
......
####
# kbuild: Generic definitions
# Convenient variables
comma := ,
squote := '
empty :=
space := $(empty) $(empty)
###
# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
dot-target = $(dir $@).$(notdir $@)
###
# The temporary file to save gcc -MD generated dependencies must not
# contain a comma
depfile = $(subst $(comma),_,$(dot-target).d)
###
# filename of target with directory and extension stripped
basetarget = $(basename $(notdir $@))
###
# Escape single quote for use in echo statements
escsq = $(subst $(squote),'\$(squote)',$1)
###
# Easy method for doing a status message
kecho := :
quiet_kecho := echo
silent_kecho := :
kecho := $($(quiet)kecho)
###
# filechk is used to check if the content of a generated file is updated.
# Sample usage:
# define filechk_sample
# echo $KERNELRELEASE
# endef
# version.h : Makefile
# $(call filechk,sample)
# The rule defined shall write to stdout the content of the new file.
# The existing file will be compared with the new one.
# - If no file exist it is created
# - If the content differ the new file is used
# - If they are equal no change, and no timestamp update
# - stdin is piped in from the first prerequisite ($<) so one has
# to specify a valid file as first prerequisite (often the kbuild file)
define filechk
$(Q)set -e; \
$(kecho) ' CHK $@'; \
mkdir -p $(dir $@); \
$(filechk_$(1)) < $< > $@.tmp; \
if [ -r $@ ] && cmp -s $@ $@.tmp; then \
rm -f $@.tmp; \
else \
$(kecho) ' UPD $@'; \
mv -f $@.tmp $@; \
fi
endef
######
# gcc support functions
# See documentation in Documentation/kbuild/makefiles.txt
# cc-cross-prefix
# Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-)
# Return first prefix where a prefix$(CC) is found in PATH.
# If no $(CC) found in PATH with listed prefixes return nothing
cc-cross-prefix = \
$(word 1, $(foreach c,$(1), \
$(shell set -e; \
if (which $(strip $(c))$(CC)) > /dev/null 2>&1 ; then \
echo $(c); \
fi)))
# output directory for tests below
TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/)
# try-run
# Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise)
# Exit code chooses option. "$$TMP" is can be used as temporary file and
# is automatically cleaned up.
try-run = $(shell set -e; \
TMP="$(TMPOUT).$$$$.tmp"; \
TMPO="$(TMPOUT).$$$$.o"; \
if ($(1)) >/dev/null 2>&1; \
then echo "$(2)"; \
else echo "$(3)"; \
fi; \
rm -f "$$TMP" "$$TMPO")
# as-option
# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,)
as-option = $(call try-run,\
$(CC) $(KBUILD_CFLAGS) $(1) -c -xassembler /dev/null -o "$$TMP",$(1),$(2))
# as-instr
# Usage: cflags-y += $(call as-instr,instr,option1,option2)
as-instr = $(call try-run,\
/bin/echo -e "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -xassembler -o "$$TMP" -,$(2),$(3))
# cc-option
# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
cc-option = $(call try-run,\
$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))
# cc-option-yn
# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
cc-option-yn = $(call try-run,\
$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)
# cc-option-align
# Prefix align with either -falign or -malign
cc-option-align = $(subst -functions=0,,\
$(call cc-option,-falign-functions=0,-malign-functions=0))
# cc-version
# Usage gcc-ver := $(call cc-version)
cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC))
# cc-fullversion
# Usage gcc-ver := $(call cc-fullversion)
cc-fullversion = $(shell $(CONFIG_SHELL) \
$(srctree)/scripts/gcc-version.sh -p $(CC))
# cc-ifversion
# Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
cc-ifversion = $(shell [ $(call cc-version, $(CC)) $(1) $(2) ] && echo $(3))
# cc-ldoption
# Usage: ldflags += $(call cc-ldoption, -Wl$(comma)--hash-style=both)
cc-ldoption = $(call try-run,\
$(CC) $(1) -nostdlib -xc /dev/null -o "$$TMP",$(1),$(2))
# ld-option
# Usage: LDFLAGS += $(call ld-option, -X)
ld-option = $(call try-run,\
$(CC) /dev/null -c -o "$$TMPO" ; $(LD) $(1) "$$TMPO" -o "$$TMP",$(1),$(2))
######
###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
# Usage:
# $(Q)$(MAKE) $(build)=dir
build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj=
# Usage:
# $(Q)$(MAKE) $(modbuiltin)=dir
modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj
# Prefix -I with $(srctree) if it is not an absolute path.
# skip if -I has no parameter
addtree = $(if $(patsubst -I%,%,$(1)), \
$(if $(filter-out -I/%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1))) $(1))
# Find all -I options and call addtree
flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o)))
# echo command.
# Short version is used, if $(quiet) equals `quiet_', otherwise full one.
echo-cmd = $(if $($(quiet)cmd_$(1)),\
echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
# printing commands
cmd = @$(echo-cmd) $(cmd_$(1))
# Add $(obj)/ for paths that are not absolute
objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o)))
###
# if_changed - execute command if any prerequisite is newer than
# target, or command line has changed
# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies
# including used config symbols
# if_changed_rule - as if_changed but execute rule instead
# See Documentation/kbuild/makefiles.txt for more info
ifneq ($(KBUILD_NOCMDDEP),1)
# Check if both arguments has same arguments. Result is empty string if equal.
# User may override this check using make KBUILD_NOCMDDEP=1
arg-check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \
$(filter-out $(cmd_$@), $(cmd_$(1))) )
endif
# >'< substitution is for echo to work,
# >$< substitution to preserve $ when reloading .cmd file
# note: when using inline perl scripts [perl -e '...$$t=1;...']
# in $(cmd_xxx) double $$ your perl vars
make-cmd = $(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1)))))
# Find any prerequisites that is newer than target or that does not exist.
# PHONY targets skipped in both cases.
any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^)
# Execute command if command has changed or prerequisite(s) are updated.
#
if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
@set -e; \
$(echo-cmd) $(cmd_$(1)); \
echo 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
# Execute the command and also postprocess generated .d dependencies file.
if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \
@set -e; \
$(echo-cmd) $(cmd_$(1)); \
scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\
rm -f $(depfile); \
mv -f $(dot-target).tmp $(dot-target).cmd)
# Usage: $(call if_changed_rule,foo)
# Will check if $(cmd_foo) or any of the prerequisites changed,
# and if so will execute $(rule_foo).
if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ), \
@set -e; \
$(rule_$(1)))
###
# why - tell why a a target got build
# enabled by make V=2
# Output (listed in the order they are checked):
# (1) - due to target is PHONY
# (2) - due to target missing
# (3) - due to: file1.h file2.h
# (4) - due to command line change
# (5) - due to missing .cmd file
# (6) - due to target not in $(targets)
# (1) PHONY targets are always build
# (2) No target, so we better build it
# (3) Prerequisite is newer than target
# (4) The command line stored in the file named dir/.target.cmd
# differed from actual command line. This happens when compiler
# options changes
# (5) No dir/.target.cmd file (used to store command line)
# (6) No dir/.target.cmd file and target not listed in $(targets)
# This is a good hint that there is a bug in the kbuild file
ifeq ($(KBUILD_VERBOSE),2)
why = \
$(if $(filter $@, $(PHONY)),- due to target is PHONY, \
$(if $(wildcard $@), \
$(if $(strip $(any-prereq)),- due to: $(any-prereq), \
$(if $(arg-check), \
$(if $(cmd_$@),- due to command line change, \
$(if $(filter $@, $(targets)), \
- due to missing .cmd file, \
- due to $(notdir $@) not in $$(targets) \
) \
) \
) \
), \
- due to target missing \
) \
)
echo-why = $(call escsq, $(strip $(why)))
endif
subdir- += basic kconfig
This diff is collapsed.
# ==========================================================================
# Building binaries on the host system
# Binaries are used during the compilation of the kernel, for example
# to preprocess a data file.
#
# Both C and C++ are supported, but preferred language is C for such utilities.
#
# Sample syntax (see Documentation/kbuild/makefiles.txt for reference)
# hostprogs-y := bin2hex
# Will compile bin2hex.c and create an executable named bin2hex
#
# hostprogs-y := lxdialog
# lxdialog-objs := checklist.o lxdialog.o
# Will compile lxdialog.c and checklist.c, and then link the executable
# lxdialog, based on checklist.o and lxdialog.o
#
# hostprogs-y := qconf
# qconf-cxxobjs := qconf.o
# qconf-objs := menu.o
# Will compile qconf as a C++ program, and menu as a C program.
# They are linked as C++ code to the executable qconf
# hostprogs-y := conf
# conf-objs := conf.o libkconfig.so
# libkconfig-objs := expr.o type.o
# Will create a shared library named libkconfig.so that consists of
# expr.o and type.o (they are both compiled as C code and the object files
# are made as position independent code).
# conf.c is compiled as a C program, and conf.o is linked together with
# libkconfig.so as the executable conf.
# Note: Shared libraries consisting of C++ files are not supported
__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
# C code
# Executables compiled from a single .c file
host-csingle := $(foreach m,$(__hostprogs),$(if $($(m)-objs),,$(m)))
# C executables linked based on several .o files
host-cmulti := $(foreach m,$(__hostprogs),\
$(if $($(m)-cxxobjs),,$(if $($(m)-objs),$(m))))
# Object (.o) files compiled from .c files
host-cobjs := $(sort $(foreach m,$(__hostprogs),$($(m)-objs)))
# C++ code
# C++ executables compiled from at least on .cc file
# and zero or more .c files
host-cxxmulti := $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m)))
# C++ Object (.o) files compiled from .cc files
host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
# Shared libaries (only .c supported)
# Shared libraries (.so) - all .so files referenced in "xxx-objs"
host-cshlib := $(sort $(filter %.so, $(host-cobjs)))
# Remove .so files from "xxx-objs"
host-cobjs := $(filter-out %.so,$(host-cobjs))
#Object (.o) files used by the shared libaries
host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
# output directory for programs/.o files
# hostprogs-y := tools/build may have been specified. Retrieve directory
host-objdirs := $(foreach f,$(__hostprogs), $(if $(dir $(f)),$(dir $(f))))
# directory of .o files from prog-objs notation
host-objdirs += $(foreach f,$(host-cmulti), \
$(foreach m,$($(f)-objs), \
$(if $(dir $(m)),$(dir $(m)))))
# directory of .o files from prog-cxxobjs notation
host-objdirs += $(foreach f,$(host-cxxmulti), \
$(foreach m,$($(f)-cxxobjs), \
$(if $(dir $(m)),$(dir $(m)))))
host-objdirs := $(strip $(sort $(filter-out ./,$(host-objdirs))))
__hostprogs := $(addprefix $(obj)/,$(__hostprogs))
host-csingle := $(addprefix $(obj)/,$(host-csingle))
host-cmulti := $(addprefix $(obj)/,$(host-cmulti))
host-cobjs := $(addprefix $(obj)/,$(host-cobjs))
host-cxxmulti := $(addprefix $(obj)/,$(host-cxxmulti))
host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs))
host-cshlib := $(addprefix $(obj)/,$(host-cshlib))
host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs))
host-objdirs := $(addprefix $(obj)/,$(host-objdirs))
obj-dirs += $(host-objdirs)
#####
# Handle options to gcc. Support building with separate output directory
_hostc_flags = $(HOSTCFLAGS) $(HOST_EXTRACFLAGS) \
$(HOSTCFLAGS_$(basetarget).o)
_hostcxx_flags = $(HOSTCXXFLAGS) $(HOST_EXTRACXXFLAGS) \
$(HOSTCXXFLAGS_$(basetarget).o)
ifeq ($(KBUILD_SRC),)
__hostc_flags = $(_hostc_flags)
__hostcxx_flags = $(_hostcxx_flags)
else
__hostc_flags = -I$(obj) $(call flags,_hostc_flags)
__hostcxx_flags = -I$(obj) $(call flags,_hostcxx_flags)
endif
hostc_flags = -Wp,-MD,$(depfile) $(__hostc_flags)
hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags)
#####
# Compile programs on the host
# Create executable from a single .c file
# host-csingle -> Executable
quiet_cmd_host-csingle = HOSTCC $@
cmd_host-csingle = $(HOSTCC) $(hostc_flags) -o $@ $< \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-csingle): $(obj)/%: $(src)/%.c FORCE
$(call if_changed_dep,host-csingle)
# Link an executable based on list of .o files, all plain c
# host-cmulti -> executable
quiet_cmd_host-cmulti = HOSTLD $@
cmd_host-cmulti = $(HOSTCC) $(HOSTLDFLAGS) -o $@ \
$(addprefix $(obj)/,$($(@F)-objs)) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-cmulti): $(obj)/%: $(host-cobjs) $(host-cshlib) FORCE
$(call if_changed,host-cmulti)
# Create .o file from a single .c file
# host-cobjs -> .o
quiet_cmd_host-cobjs = HOSTCC $@
cmd_host-cobjs = $(HOSTCC) $(hostc_flags) -c -o $@ $<
$(host-cobjs): $(obj)/%.o: $(src)/%.c FORCE
$(call if_changed_dep,host-cobjs)
# Link an executable based on list of .o files, a mixture of .c and .cc
# host-cxxmulti -> executable
quiet_cmd_host-cxxmulti = HOSTLD $@
cmd_host-cxxmulti = $(HOSTCXX) $(HOSTLDFLAGS) -o $@ \
$(foreach o,objs cxxobjs,\
$(addprefix $(obj)/,$($(@F)-$(o)))) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) $(host-cshlib) FORCE
$(call if_changed,host-cxxmulti)
# Create .o file from a single .cc (C++) file
quiet_cmd_host-cxxobjs = HOSTCXX $@
cmd_host-cxxobjs = $(HOSTCXX) $(hostcxx_flags) -c -o $@ $<
$(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
$(call if_changed_dep,host-cxxobjs)
# Compile .c file, create position independent .o file
# host-cshobjs -> .o
quiet_cmd_host-cshobjs = HOSTCC -fPIC $@
cmd_host-cshobjs = $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE
$(call if_changed_dep,host-cshobjs)
# Link a shared library, based on position independent .o files
# *.o -> .so shared library (host-cshlib)
quiet_cmd_host-cshlib = HOSTLLD -shared $@
cmd_host-cshlib = $(HOSTCC) $(HOSTLDFLAGS) -shared -o $@ \
$(addprefix $(obj)/,$($(@F:.so=-objs))) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-cshlib): $(obj)/%: $(host-cshobjs) FORCE
$(call if_changed,host-cshlib)
targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
$(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs)
# Backward compatibility
asflags-y += $(EXTRA_AFLAGS)
ccflags-y += $(EXTRA_CFLAGS)
cppflags-y += $(EXTRA_CPPFLAGS)
ldflags-y += $(EXTRA_LDFLAGS)
#
# flags that take effect in sub directories
export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
# Figure out what we need to build from the various variables
# ===========================================================================
# When an object is listed to be built compiled-in and modular,
# only build the compiled-in version
obj-m := $(filter-out $(obj-y),$(obj-m))
# Libraries are always collected in one lib file.
# Filter out objects already built-in
lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
# Handle objects in subdirs
# ---------------------------------------------------------------------------
# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
# and add the directory to the list of dirs to descend into: $(subdir-y)
# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
# and add the directory to the list of dirs to descend into: $(subdir-m)
# Determine modorder.
# Unfortunately, we don't have information about ordering between -y
# and -m subdirs. Just put -y's first.
modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
subdir-y += $(__subdir-y)
__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
subdir-m += $(__subdir-m)
obj-y := $(patsubst %/, %/built-in.o, $(obj-y))
obj-m := $(filter-out %/, $(obj-m))
# Subdirectories we need to descend into
subdir-ym := $(sort $(subdir-y) $(subdir-m))
# if $(foo-objs) exists, foo.o is a composite object
multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used := $(multi-used-y) $(multi-used-m)
single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
# Build list of the parts of our composite objects, our composite
# objects depend on those (obviously)
multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
multi-objs := $(multi-objs-y) $(multi-objs-m)
# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
# tell kbuild to descend
subdir-obj-y := $(filter %/built-in.o, $(obj-y))
# $(obj-dirs) is a list of directories that contain object files
obj-dirs := $(dir $(multi-objs) $(subdir-obj-y))
# Replace multi-part objects by their individual parts, look at local dir only
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
# Add subdir path
extra-y := $(addprefix $(obj)/,$(extra-y))
always := $(addprefix $(obj)/,$(always))
targets := $(addprefix $(obj)/,$(targets))