Commit 5b579eb3 authored by Alessandro Rubini's avatar Alessandro Rubini Committed by Grzegorz Daniluk

doc: trivial: fix warnings

Signed-off-by: Alessandro Rubini's avatarAlessandro Rubini <rubini@gnudd.com>
parent 39d7774c
......@@ -77,7 +77,7 @@ want to get your hands dirty and prefer to use the binaries available at
@section Repositories and Releases
This manual is about the official @value{release} stable release of the White
Rabbit PTP Core (@sc{WRPC}).
Rabbit PTP Core (@sc{wrpc}).
The code and documentation for the project is distributed in the
following places:
......@@ -595,7 +595,7 @@ One option is to type all the commands to initialize the @sc{wrpc} software to
the required state every time the Core starts. However, you can also write your
own initialization script to the Flash/EEPROM. It will be executed every time
the @sc{wrpc} software starts. A simple script that loads the calibration
parameters, configures the @sc{WR} mode to Slave and starts the @sc{ptp} daemon
parameters, configures the @sc{wr} mode to Slave and starts the @sc{ptp} daemon
is presented below:
@example
......@@ -1286,8 +1286,8 @@ clock (requires external 10MHz and 1-PPS reference), Master or Slave. After
setting the mode, @t{ptp start} must be re-issued
@item @code{calibration} @tab tries to read t2/4 phase transition value from the
Flash/EEPROM (in @sc{WR} Master or GrandMaster mode), or executes the t24p
calibration procedure and stores its result to the Flash/EEPROM (in @sc{WR}
Flash/EEPROM (in @sc{wr} Master or GrandMaster mode), or executes the t24p
calibration procedure and stores its result to the Flash/EEPROM (in @sc{wr}
Slave mode)
@item @code{time} @tab prints current time from @sc{wrpc}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment