Add watchdog to FPGA and include bugfixes
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Check whether deltas (delta_tx_m, delta_rx_m, delta_tx_s, delta_rx_s) are
not zero in SNMP, not in PPSI

Remove object wrsPtpRTTErrCnt from MIB, not compatible change, but we're before
release...

Update PPSI
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Move creating rule for PTP over UDP from rtud init script to wrsw_rtud.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Removed code used to be to add rtu entries for local ports. Such setup suppouse
to allow access to ARM CPU from switch's ports. However, hw_addr in hal_shmem
was not filled and it end up that address 00:00:00:00:00:00 was added.

Removed solution didn't work neither we wanted it to be there.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Hope this time it works. Problem was when dot-config set IP via dhcp then
static.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fix problem when IP address was set via dhcp then as static.
Second problem was that udhcpc wasn't able to get IP when interface was put down just
before its start.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

set temperature thresholds
disable logic in object wrsSwcoreStatus
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Return always OK for wrsSwcoreStatus (except for first read).
Logic for this object needs more investigation.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fix specifying verbosity level by setting WRS_MSG_LEVEL env variable
and fix changing verbosity with -v/-q
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add possibility to configure IP address of management port in dot-config.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This commit is to manage with situation that there is no IP address at the
moment of getting new dot-config. At this point IP can be available from
barebox, but not always. New functionality checks for IP configuration in the
old dot-config. IP will be reconfigured after getting new dot-config.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

In case there is no info how to get management port's IP in dot-config, use
DHCP by default.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--Update /etc/init.d/network script.
Keeping lo up prevents monit from restarting dropbear and lighttpd,
then finally rebooting system due to exceeded number of maximum application's
restarts.
--keep lo ocnfiguration in /etc/network/interfaces due to above
--Update user manual
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update Kconfig
Update user-manual
Update monit's init script
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Update Kconfig
Update user-manual
Update snmpd's init script
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

When snmpd's init script is called with restart option then script complain
that snmp is already running. Probalby it takes some short time to kill snmp.
Add sleep 1 second to solve this problem.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Improvement of snmp
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Include 3 new object from wrsOSStatusGroup into calculations of wrsOSStatus:
--wrsMemoryFreeLow
--wrsCpuLoadHigh
--wrsDiskSpaceLow
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Notify with error or warning when disk usage is too high.

Additionally:
--update MIB
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Notify with error or warning when CPU load is too high.

Additionally:
--update MIB
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Notify with error or warning when mamory usage is too high.

Additionally:
--update MIB
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

New table with information about mounted partitions

Add new wrsDiskTable with objects:
--wrsDiskMountPath
--wrsDiskSize
--wrsDiskUsed
--wrsDiskFree
--wrsDiskUseRate
--wrsDiskFilesystem

Additionally:
-- update of MIB
-- update Makefile
-- update init.c
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Fix of description for:
--wrsPstatsTable
--wrsPstatsEntry

Fix location of groups/tables in comments for:
--wrsTimingStatusGroup
--wrsNetworkingStatusGroup
--wrsPstatsTable
--wrsPtpDataTable
--wrsPortStatusTable

Add location in comments for:
--wrsDetailedStatusesGroup
--wrsOperationStatus
--wrsSpllState

Move of comment for wrsStartCntGroup
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

New group with load averages similar to these returned by uptime,
but multiplied with 100 to avoid floats.

Add new wrsCpuLoadGroup with objects:
-- wrsCPULoadAvg1min
-- wrsCPULoadAvg5min
-- wrsCPULoadAvg15min

Additionally:
-- update of MIB
-- update Makefile
-- update init.c
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add new wrsMemoryGroup with objects:
-- wrsMemoryTotal
-- wrsMemoryUsed
-- wrsMemoryUsedPerc (% of used memory)
-- wrsMemoryFree

Additionally:
-- update of MIB
-- update Makefile
-- update init.c

NOTE: I tried to implement these objects with sysinfo function. However,
sysinfo doesn't provide information about amount cached memory, which is
included in used memory.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Trigger data fill in init function to avoid getting "first read" values later.
Note: This "trick" may not work when cache update time is increased
significantly.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

To make SNMP return objects more consistent, "first read" defines were changed
for following objects in wrsNetworkingStatusGroup:
--wrsEndpointStatus
--wrsSwcoreStatus
--wrsRTUStatus
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

--update MIB
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Additionally:
--update MIB
--make struct wrsPtpDataTable_s extern in wrsPtpDataTable.h
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add following objects to wrsPtpDataTable:
--wrsPtpServoStateErrCnt
--wrsPtpClockOffsetErrCnt
--wrsPtpRTTErrCnt
--wrsPtpDeltaRxTxErrCnt

Additionally:
--uplift PPSI to shmem version 6
--update wrs_dump_shmem
--update MIB
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Add object to inform if TX and RX PTP packets are flowing.

Additionally:
--update MIB
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>