1. 01 Dec, 2016 3 commits
  2. 21 Aug, 2015 1 commit
  3. 06 Jul, 2015 1 commit
  4. 29 Jun, 2015 2 commits
    • Adam Wujek's avatar
      rootfs: split start-daemons.sh.in into init scripts · e0a757fe
      Adam Wujek authored
      Split start-daemons.sh.in into init scripts for:
      --HAL
      --RTUd
      --PPSI
      Since HAL, RTUd, PPSI have already waiting for dependent processess
      implemented, we're allowed to spawn them (semi) simultaneously.
      
      Additionally:
      --Remove start-daemons.sh.in
      --Remove updating start-daemons.sh.in log values in apply_dot-config
      --Create links in /etc/rcS/ to init scripts
      
      NOTE: Be sure that no init script has the same name as running program.
            It may cause problems for "pidof".
      Signed-off-by: Adam Wujek's avatarAdam Wujek <adam.wujek@cern.ch>
      e0a757fe
    • Adam Wujek's avatar
      rootfs: use wrs_version -s in startup-mb.sh · facf8dcf
      Adam Wujek authored
      Use wrs_version -s in /wr/sbin/startup-mb.sh to get scb version.
      Previous method to distinguish scb versions did not work in all cases:
      mtdinfo -a | grep -A 1 dataflash | grep 264
      Signed-off-by: Adam Wujek's avatarAdam Wujek <adam.wujek@cern.ch>
      facf8dcf
  5. 24 Jun, 2015 1 commit
  6. 21 Apr, 2015 2 commits
  7. 08 Jan, 2015 1 commit
  8. 11 Dec, 2014 1 commit
  9. 05 Dec, 2014 1 commit
  10. 01 Oct, 2014 1 commit
  11. 30 Sep, 2014 2 commits
  12. 29 Sep, 2014 1 commit
  13. 24 Sep, 2014 1 commit
    • Alessandro Rubini's avatar
      general: rename wrsw_pstats, wrsw_vlans, wrsw_version to be "wrs_" · c0e34f70
      Alessandro Rubini authored
      Inconsistent naming has always been a problem for me. Since other
      developers agree, we chose to rename all stuff to be wrs_ or wr_
      for switch-specific stuff and generic WR functionality.  Ok, the
      split is not very clear-cut, I agree.
      
      This commit only fixes the tools and their users:
           wrs_version
           wrs_vlan
           wrs_pstats
      
      It doesn't touch wrsw_hal and wrsw_rtud (nor it adds any prefix to
      non-prefixed tools like load-lm32 and so on).
      Signed-off-by: Alessandro Rubini's avatarAlessandro Rubini <rubini@gnudd.com>
      c0e34f70
  14. 18 Sep, 2014 1 commit
  15. 29 Jul, 2014 1 commit
  16. 28 May, 2014 1 commit
  17. 01 Apr, 2014 1 commit
  18. 31 Jan, 2014 1 commit
  19. 29 Nov, 2013 1 commit
  20. 10 Jul, 2013 1 commit
    • Benoit Rat's avatar
      userspace: Improve the status LED mechanism · 273250b7
      Benoit Rat authored
      0. From power until linux has boot the led is unpowered
      1. We first set init it before flashing FPGA => LED is yellow.
      2. Then when the HAL start => LED is orange
      3. WR is setup => LED is green
      273250b7
  21. 04 Apr, 2013 1 commit
    • Benoit Rat's avatar
      build, userspace: supporting LX130T & LX240T FPGAs · 78719448
      Benoit Rat authored
      * flash-wrs: add gateware selection to only use 2 HDL binaries because the RAM size is not big enough to extract 4 HDLs during flashing
      * build: add the new gatewares with PWM and LX240T support for 18ports & 8ports
      * userspace: Select the proper gateware to load on fpga using the shw_ver tool and the i2c dip switch on miniBP
      78719448
  22. 18 Feb, 2013 1 commit
  23. 28 Jan, 2013 1 commit
  24. 29 Oct, 2012 1 commit
  25. 29 Jul, 2012 1 commit
  26. 19 Jul, 2012 1 commit
  27. 12 Jun, 2012 1 commit
  28. 08 Jun, 2012 1 commit