Skip to content

W
White Rabbit Switch - Software
Commit c23b5a5f authored by Adam Wujek's avatar Adam Wujek 💬
Browse files
Options

Kconfig: allow disabling LLDP on the management port 

Signed-off-by: Adam Wujek's avatarAdam Wujek <adam.wujek@cern.ch>
parent c187ed89
Hide whitespace changes
Inline Side-by-side
Showing with 18 additions and 5 deletions
Kconfig
View file @ c23b5a5f
......@@ -927,6 +927,13 @@ config LLDPD_DISABLE
help
Disable LLDP daemon to prevent sending LLDP frames. It may be useful
for networks not using LLDP or with a low latency requirement.
config LLDPD_MANAGEMENT_PORT_DISABLE
bool "Disable LLDP on the management port"
default n
depends on !LLDPD_DISABLE
help
Disable LLDP traffic on management port.
endmenu
config HTTPD_DISABLE
......
userspace/rootfs_override/etc/init.d/lldpd.sh
View file @ c23b5a5f
......@@ -5,6 +5,7 @@
LLDPD_CONFIG=/etc/lldpd.conf
LLDPD=/usr/sbin/lldpd
LLDPD_CLI=/usr/sbin/lldpcli
# -x -- Enable SNMP subagent.
LLDPD_OPT=-x
MONIT=/usr/bin/monit
......@@ -26,11 +27,6 @@ start_counter() {
start() {
echo -n "Creating lldpd config: "
echo "configure system hostname '$(hostname)'" > $LLDPD_CONFIG
echo "configure system description 'WR-SWITCH: $(/wr/bin/wrsw_version)'" >> $LLDPD_CONFIG
echo "resume" >> $LLDPD_CONFIG
echo "OK"
echo -n "Starting lldpd: "
......@@ -51,6 +47,16 @@ start() {
echo -n "Force start of lldpd: "
fi
# Creating lldpd config
echo "# This configuration file was generated by $0 at startup" > $LLDPD_CONFIG
echo "# If you would like to change a lldpd configuration in runtime please consider using lldpcli" >> $LLDPD_CONFIG
echo "configure system hostname '$(hostname)'" >> $LLDPD_CONFIG
echo "configure system description 'WR-SWITCH: $(/wr/bin/wrsw_version)'" >> $LLDPD_CONFIG
if [ "$CONFIG_LLDPD_MANAGEMENT_PORT_DISABLE" = "y" ]; then
echo "configure system interface pattern '!eth*'" >> $LLDPD_CONFIG
fi
echo "resume" >> $LLDPD_CONFIG
start-stop-daemon -S -q -p /var/run/lldpd.pid --exec $LLDPD -- $LLDPD_OPT
ret=$?
if [ $ret -eq 0 ]; then
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment