Commit b165798d authored by Grzegorz Daniluk's avatar Grzegorz Daniluk

doc/wrs_failures: adding links to general status objects

parent 6db69ad3
......@@ -10,20 +10,22 @@
\snmpentrys{WR-SWITCH-MIB}{wrsGeneralStatusGroup}{wrsMainSystemStatus}{
WRS general status of a switch can be \texttt{OK}, \texttt{Warning} or
\texttt{Error}. In case of an error or warning, please check the values of
\texttt{wrsOSStatus}, \texttt{wrsTimingStatus} and
\texttt{wrsNetworkingStatus} to find out which subsystem causes the problem.}
\texttt{\glshyperlink{WR-SWITCH-MIB::wrsOSStatus}},
\texttt{\glshyperlink{WR-SWITCH-MIB::wrsTimingStatus}} and
\texttt{\glshyperlink{WR-SWITCH-MIB::wrsNetworkingStatus}} to find out which
subsystem causes the problem.}
\snmpentrys{WR-SWITCH-MIB}{wrsGeneralStatusGroup}{wrsOSStatus}{
Collective status of the operating system running on WR switch. In case of
an error or warning, please check status objects in the
\texttt{wrsOSStatusGroup}.}
\texttt{\glshyperlink{WR-SWITCH-MIB::wrsOSStatusGroup}}.}
\snmpentrys{WR-SWITCH-MIB}{wrsGeneralStatusGroup}{wrsTimingStatus}{
Collective status of the synchronization subsystem. In case of an
error or warning, please check status objects in the
\texttt{wrsTimingStatusGroup}.}
\texttt{\glshyperlink{WR-SWITCH-MIB::wrsTimingStatusGroup}}.}
\snmpentrys{WR-SWITCH-MIB}{wrsGeneralStatusGroup}{wrsNetworkingStatus}{
Collective status of the Ethernet switching subsystem. In case of an error
or warning, please check status objects in the
\texttt{wrsNetworkingStatusGroup}.\vspace{12pt}}
\texttt{\glshyperlink{WR-SWITCH-MIB::wrsNetworkingStatusGroup}}.\vspace{12pt}}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\snmpentrys{WR-SWITCH-MIB}{}{wrsDetailedStatusesGroup}{
......@@ -47,8 +49,8 @@
\underline{On error:}
\begin{pck_proc}
\item Dump state
\item Check \texttt{wrsBootConfigStatus}, if it reports an
error, please verify your WRS configuration.
\item Check \texttt{\glshyperlink{WR-SWITCH-MIB::wrsBootConfigStatus}},
if it reports an error, please verify your WRS configuration.
\item Restart the switch
\item Please consult WR experts if the problem persists.
\end{pck_proc}
......@@ -129,19 +131,20 @@
\texttt{Error} when any of PTP error counters in \texttt{wrsPtpDataTable}\\
(\texttt{wrsPtpServoStateErrCnt}, \texttt{wrsPtpClockOffsetErrCnt} or\\
\texttt{wrsPtpRTTErrCnt}) has increased since the last scan (issue
\ref{fail:timing:ppsi_track_phase}, \ref{fail:timing:offset_jump},
\ref{fail:timing:rtt_jump}), at least one of the $\Delta_{TXM}$,
$\Delta_{RXM}$, $\Delta_{TXS}$, $\Delta_{RXS}$ is 0 (issue
\ref{fail:timing:deltas_report}) or PTP servo update counter is not
\ref{fail:timing:ppsi_track_phase},
\ref{fail:timing:offset_jump}, \ref{fail:timing:rtt_jump}), at least one of
the $\Delta_{TXM}$, $\Delta_{RXM}$, $\Delta_{TXS}$, $\Delta_{RXS}$ is 0
(issue \ref{fail:timing:deltas_report}) or PTP servo update counter is not
increasing.\\
\underline{On error:}
\begin{pck_proc}
\item Dump state
\item Check \texttt{wrsSoftPLLStatus} on the Master (WR device one step
higher in a timing hierarchy). Eventually proceed to investigate the
problem on the Master switch. Otherwise, continue with the primary WRS.
\item Check \texttt{\glshyperlink{WR-SWITCH-MIB::wrsSoftPLLStatus}} on the
Master (WR device one step higher in a timing hierarchy). Eventually
proceed to investigate the problem on the Master switch. Otherwise,
continue with the primary WRS.
\item Verify if the link to WR Master was not lost by checking the
object\\ \texttt{wrsSlaveLinksStatus}.
object\\ \texttt{\glshyperlink{WR-SWITCH-MIB::wrsSlaveLinksStatus}}.
\item If this is not the case, restart the switch.
\item If the problem persists replace the switch with a new unit.
%(see \ref{cern:wrs_replacement}).
......@@ -155,8 +158,8 @@
\texttt{wrsSpllAlignState} is not \emph{Locked} (for Grand Master mode), or
any of \texttt{wrsSpllHlock}, \texttt{wrsSpllMlock} equals to 0 (for
Boundary Clock mode).\\
\texttt{Warning} when \texttt{wrsSpllDelCnt} $>$ 0 (for Grand Master mode)
or \texttt{wrsSpllDelCnt} has changed (for all other modes).\\
\texttt{Warning} when \texttt{wrsSpllDelCnt} $>$ 0 (for Grand Master mode) or
\texttt{wrsSpllDelCnt} has changed (for all other modes).\\
\underline{On error:}\\
For GrandMaster WRS:
\begin{pck_proc}
......@@ -171,10 +174,11 @@
\glspar For Boundary Clock WRS:
\begin{pck_proc}
\item Dump state
\item Check \texttt{wrsSoftPLLStatus} on the Master. Eventually proceed to
investigate the problem on the Master switch.
\item Check \texttt{\glshyperlink{WR-SWITCH-MIB::wrsSoftPLLStatus}} on the
Master. Eventually proceed to investigate the problem on the Master
switch.
\item Verify if the link to WR Master was not lost by checking the
object\\ \texttt{wrsSlaveLinksStatus}.
object\\ \texttt{\glshyperlink{WR-SWITCH-MIB::wrsSlaveLinksStatus}}.
\item Restart the switch.
\item If the problem persists, replace the switch with a new unit.
%(see \ref{cern:wrs_replacement}).
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment