Commit 291f784f authored by Adam Wujek's avatar Adam Wujek 💬 Committed by Grzegorz Daniluk

doc/wrs_failures: add vspace to the style instead of each description

Signed-off-by: Adam Wujek's avatarAdam Wujek <adam.wujek@cern.ch>
parent 0ffb7a96
......@@ -25,7 +25,7 @@
\snmpentrys{WR-SWITCH-MIB}{wrsGeneralStatusGroup}{wrsNetworkingStatus}{
Collective status of the Ethernet switching subsystem. In case of an error
or warning, please check status objects in the
\texttt{\glshyperlink{WR-SWITCH-MIB::wrsNetworkingStatusGroup}}.\vspace{12pt}}
\texttt{\glshyperlink{WR-SWITCH-MIB::wrsNetworkingStatusGroup}}.}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\snmpentrys{WR-SWITCH-MIB}{}{wrsDetailedStatusesGroup}{
......@@ -55,7 +55,7 @@
\item Restart the switch
\item Please consult WR experts if the problem persists.
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
\snmpentrys{WR-SWITCH-MIB}{wrsOSStatusGroup}{wrsTemperatureWarning}{
\underline{Description:}
......@@ -72,7 +72,7 @@
\item Replace the switch with a new unit and consult the WR Switch
manufacturer for a repair.
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
\snmpentrys{WR-SWITCH-MIB}{wrsOSStatusGroup}{wrsMemoryFreeLow}{
\underline{Description:}
......@@ -85,7 +85,7 @@
\item Send the dumped state of the switch to WR experts for analysis as
this might mean there is some internal problem in the WRS firmware.
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
\snmpentrys{WR-SWITCH-MIB}{wrsOSStatusGroup}{wrsCpuLoadHigh}{
\underline{Description:}
......@@ -99,7 +99,7 @@
\item Send the dumped state of the switch to WR experts for analysis as
this might mean there is some internal problem in the WRS firmware.
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
\snmpentrys{WR-SWITCH-MIB}{wrsOSStatusGroup}{wrsDiskSpaceLow}{
\underline{Description:}
......@@ -118,13 +118,13 @@
\item Send the dumped state of the switch to WR experts for analysis as
this might mean there is some internal problem in the WRS firmware.
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
%------------------------------------------------------------------------
\snmpentrys{WR-SWITCH-MIB}{wrsDetailedStatusesGroup}{wrsTimingStatusGroup} {
\underline{Description:}
Group with collective statuses of the timing subsystem.} %\vspace{12pt}}
Group with collective statuses of the timing subsystem.} %}
\snmpentrys{WR-SWITCH-MIB}{wrsTimingStatusGroup}{wrsPTPStatus}{
\underline{Description:}
......@@ -153,7 +153,7 @@
\item If the problem persists replace the switch with a new unit.
%(see \ref{cern:wrs_replacement}).
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
\snmpentrys{WR-SWITCH-MIB}{wrsTimingStatusGroup}{wrsSoftPLLStatus}{
\underline{Description:}
......@@ -192,7 +192,7 @@
\item If the problem persists, replace the switch with a new unit.
%(see \ref{cern:wrs_replacement}).
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
\snmpentrys{WR-SWITCH-MIB}{wrsTimingStatusGroup}{wrsSlaveLinksStatus}{
\underline{Description:}
......@@ -222,7 +222,7 @@
\item Replace the faulty switch with a new unit, if this does not solve
the problem, make sure your fiber link is not broken.
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
\snmpentrys{WR-SWITCH-MIB}{wrsTimingStatusGroup}{wrsPTPFramesFlowing}{
\underline{Description:}
......@@ -244,13 +244,13 @@
\item If the problem persists, please contact WR experts for in-depth
investigation.
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
%------------------------------------------------------------------------
\snmpentrys{WR-SWITCH-MIB}{wrsDetailedStatusesGroup}{wrsNetworkingStatusGroup}{
\underline{Description:}
Group with collective statuses of the networking subsystem.\vspace{12pt}}
Group with collective statuses of the networking subsystem.}
\snmpentrys{WR-SWITCH-MIB}{wrsNetworkingStatusGroup}{wrsSFPsStatus}{
\underline{Description:}
......@@ -273,7 +273,7 @@
\item Otherwise, you should use a WR-supported SFP module and make sure it
is declared together with calibration values in the WRS configuration.
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
\snmpentrys{WR-SWITCH-MIB}{wrsNetworkingStatusGroup}{wrsEndpointStatus}{
\underline{Description:}
......@@ -292,7 +292,7 @@
\item If the problem persists, please contact WR experts for in-depth
investigation.
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
\snmpentrys{WR-SWITCH-MIB}{wrsNetworkingStatusGroup}{wrsSwcoreStatus}{
\underline{Description:}
......@@ -307,7 +307,7 @@
too much high priority traffic in your network, or there is some
internal problem in the WRS firmware.
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
\snmpentrys{WR-SWITCH-MIB}{wrsNetworkingStatusGroup}{wrsRTUStatus}{
\underline{Description:}
......@@ -322,7 +322,7 @@
through your switch. If possible in your application, try using larger
Ethernet frames with lower load to transfer information.
\end{pck_proc}
\glspar \underline{Related problems:}\vspace{12pt}}
\glspar \underline{Related problems:}}
%------------------------------------------------------------------------
......
......@@ -188,7 +188,7 @@
\setlist[enumerate]{leftmargin=\paraaindent}
--\kern 0.33em\glsentryitem{##1}\glstreenamefmt{\glstarget{##1}{\texttt{\textmd{\glsentryuseri{##1}}::}\glossentryname{##1}}}%
\ifglshassymbol{##1}{\kern 0.33em(\glossentrysymbol{##1})}{}%
\glossentrydesc{##1}\glspostdescription\kern 0.33em##2\par
\glossentrydesc{##1}\glspostdescription\kern 0.33em##2\par\vspace{12pt}
}%
\renewcommand{\subglossentry}[3]{%
\hangindent##1\glstreeindent\relax
......@@ -206,7 +206,7 @@
\fi
\glstreenamefmt{\glstarget{##2}{\glossentryname{##2}}}%
\ifglshassymbol{##2}{\kern 0.33em(\glossentrysymbol{##2})}{}%
\glossentrydesc{##2}\glspostdescription\kern 0.33em##3\par
\glossentrydesc{##2}\glspostdescription\kern 0.33em##3\par\vspace{12pt}
}%
%redefine \glspar to support indentation in many paragraphs
\renewcommand{\glspar}{%
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment