Commit 1a5a54c5 authored by Benoit Rat's avatar Benoit Rat

doc: fix some markdown syntax to improve portability

parent 50f368ab
......@@ -789,11 +789,11 @@ For example you can set it up like this
After reprogramming/rebooting the FGPA, the channels are set up by default as:
#. Channel 0 (connector #1) output a PPS signal: `p`
#. Channel 1 (connector #2) low state: `0`.
#. Channel 2 (connector #3) same as ch1: low state: `0`
#. Channel 3 (connector #4) is configured as input with termination impedance: `i`.
#. Channel 4 (connector #5) is in Clock Mode with termination: `C`.
1. Channel 0 (connector #1) output a PPS signal: `p`
2. Channel 1 (connector #2) low state: `0`.
3. Channel 2 (connector #3) same as ch1: low state: `0`
4. Channel 3 (connector #4) is configured as input with termination impedance: `i`.
5. Channel 4 (connector #5) is in Clock Mode with termination: `C`.
To reset to the default mode you can reset/reprogram the FPGA or set it back with:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment