Setting up DDS demo system on a CERN VME Crate
Requirements:
Hardware:*
- A VME crate with a MEN A20 CPU
- 2 SVECs with 2 DDS FMCs installed in slot 1.
- A WR Switch & fibers.
Software:*
- An LM32 toolchain to build the realtime software. Until it becomes
officially supported, the is one installed in
/user/twlostow/apps/gcc-lm32
Setup instructions:
- Note: you must do the following operations from a PC with Internet access. *
- Clone the repository of the project and ensure the submodules are up-to-date:
$ git clone git:https://www.ohwr.org/white-rabbit/wr-d3s.git
$ cd wr-d3s
$ git submodule update --init
- Edit $software/applications/wr_d3s/rt/common/wrnode.mk$ and point it to the correct LM32 compiler location:
CROSS_COMPILE=/user/twlostow/apps/gcc-lm32/bin/lm32-elf-
- Build the real-time firmware and tools:
$ cd software/
$ make