This page provides ATTEST Configuration ("Configuration Management") used for WRS release tests. In the tests 4 different "configuration sets" are used:
"Configuration Manager" name | Name used below | description |
---|---|---|
wrs-release-VLANtests | VLAN tests | Configuration of WR Switch for VLAN tests |
wrs-release-PTPtests-802-noVlans | PTP tests 802-noVLAN |
Configuration of WR Switch which uses IEEE802.3 as PTP mapping and no VLANs |
wrs-release-PTPtests-802-Vlans | PTP tests 802-VLAN |
Configuration of WR Switch which uses IEEE802.3 as PTP mapping and VLANs used |
wrs-release-PTPtests-UDP-noVlans | PTP tests UDP-noVLAN |
Configuration of WR Switch which uses UDP as PTP mapping and no VLANs |
Below, most important parameters set in the "Configuration Manager" of the ATTEST client are provided. The settings that do not need to be changed from their default values are not provided. The settings are provided for each "tab" of the "Configuration Manager". If there is some difference between different "configuration sets", table provides information for each set separately. Otherwise, the common settings Are provided.
Configuration different for "Configuration sets"
DUT Information
Parameter | VLAN tests | PTP tests 802-noVLAN |
PTP tests 802-VLAN |
PTP tests UDP-noVLAN |
---|---|---|---|---|
Device Name | WR Switch (VLAN tests) | WR Switch (IEEE802.3 PTP mapping, no VLANs) | WR Switch (IEEE802.3 PTP mapping, VLANs used) | WR Switch (UDP PTP mapping, no VLANs) |
Protocol Options
Parameter | VLAN tests | PTP tests 802-noVLAN |
PTP tests 802-VLAN |
PTP tests UDP-noVLAN |
---|---|---|---|---|
PTP-BC->General->VLAN Encapsulation | unset | unset | set | unset |
WRPTP->Global->Transport Type | IEEE802.3 | IEEE802.3 | IEEE802.3 | UDP/UPv4 |
WRPTP->Global->VLAN Encapsulation | unset | unset | set | unset |
Configuration identical for "Configuration sets"
DUT Information
Parameter | Value |
---|---|
Device Type | L2 Switch |
Build Version | |
IPv4 Address | 10.11.34.199 |
CLI command Prompt | ctdwa-774-cxnatest1 |
Privilege mode | Disabled |
Number of Test Interfaces | 3 |
Management Mode
DUT Management Mode: CLI-SSH
Parameter | Value |
---|---|
CLI-SSH:Port Number | 22 |
CLI-SSH:User name | root |
CLI-SSH:Password | \n |
Interface Setup
Number | ATTEST Interface ID | DUT Interface ID | IPv4 Address | VLAN ID |
---|---|---|---|---|
P1 | 0/0 | wri1 | 10.11.34.199 | 300 |
P1 | 0/0 | wri1 | 10.11.34.199 | 301 |
P1 | 0/0 | wri1 | 10.11.34.199 | 317 |
Protocol Options
Parameter | Value |
---|---|
GENERAL->Platform Type | Xena |
GENERAL->Array Mapping->CLI mapping file | cli_array.tcl |
PTP-BC->Array Mapping->CLI mapping file | ptp_array_wrs_V2.tcl |
VLAN->Array Mapping ->CLI mapping file | vlan_array_wrs.tcl |
WRPTP->Array Mapping->CLI mapping file | wrptp_array_wrs_V2.tcl |