Commit ecca1578 authored by Dimitris Lampridis's avatar Dimitris Lampridis

EFTS2017: final, delivered versions of presentation and lab notes

parent 543a3093
......@@ -16,7 +16,7 @@
\title{White Rabbit Lab}
\author{Dimitrios Lampridis}
\institute{CERN BE-CO\\Hardware and Timing section}
\date[29 June 2016]{European Frequency and Time Seminar\\Besançon, 29 June 2016}
\date[29 June 2017]{European Frequency and Time Seminar\\Besançon, 29 June 2017}
\begin{document}
......@@ -76,7 +76,7 @@
$ make
$ sudo insmod fmc-bus/kernel/fmc.ko
$ sudo insmod spec.ko
$ sudo insmod kernel/spec.ko
$ sudo dmesg
\end{lstlisting}
......@@ -100,7 +100,7 @@
\end{enumerate}
\begin{lstlisting}
$ cd ~/Desktop/EFTS2017/binaries
$ tar zxvf wrpc-v4.0_binaries.tar
$ tar zxvf wrpc-v4.0_binaries.tar.gz
$ cd ~/Desktop/EFTS2017/spec-sw
$ sudo tools/spec-fwloader ../binaries/spec/spec_wr_ref_top.bin
......@@ -139,7 +139,7 @@
\item Add an SFP calibration database
\item Restart the WR PTP core
\item Watch the scope for PPS signals, note performance
\item Start the monitor
\item Start the monitor and note differences
\item Re-estimate fiber length
\end{enumerate}
\begin{lstlisting}
......
......@@ -69,7 +69,7 @@
\title[White Rabbit\hspace{3em}\insertframenumber/\inserttotalframenumber]{White Rabbit}
\author{Dimitrios Lampridis}
\institute{CERN BE-CO\\Hardware and Timing section}
\date[29 June 2016]{European Frequency and Time Seminar\\Besançon, 29 June 2016}
\date[29 June 2017]{European Frequency and Time Seminar\\Besançon, 29 June 2017}
\AtBeginSection[]
{
......@@ -426,9 +426,9 @@
\includegraphics[width=.8\textheight, angle=90]{measurements/WRSlowJitter/rsz_3d_image__1_.jpg}
\column{.65\textwidth}
\begin{itemize}
\item Current release of WRS in GM mode has suboptimal performance on both jitter (9ps RMS 1Hz-100kHz) and ADEV (1.4E-11 $\tau$=1s)
\item Current release of WRS in GM mode has suboptimal performance on both jitter (9ps RMS 1Hz-100kHz) and ADEV (1.4E-11 $\tau$=1s ENBW 50Hz)
\item A daughterboard was designed, produced and tested to improve the performance
\item Modified WRS improves performance on both jitter ($<$2ps RMS 10Hz-100kHz) and ADEV ($<$5E-13 $\tau$=1s) in GM mode
\item Modified WRS improves performance on both jitter ($<$2ps RMS 10Hz-100kHz) and ADEV ($<$5E-13 $\tau$=1s ENBW 50Hz) in GM mode
\end{itemize}
\end{columns}
\end{frame}
......@@ -451,18 +451,6 @@
\end{center}
\end{frame}
\begin{frame}{Test Results in GM mode: Time deviation}
\begin{center}
\includegraphics[height=.85\textheight]{measurements/WRSlowJitter/tdev.png}
\end{center}
\end{frame}
\begin{frame}{Test Results in GM mode: Time error}
\begin{center}
\includegraphics[height=.85\textheight]{measurements/WRSlowJitter/phase.png}
\end{center}
\end{frame}
\begin{frame}{Test Results in Slave mode: PM noise}
\begin{center}
\includegraphics[height=.85\textheight]{measurements/WRSlowJitter/slave_pn.png}
......@@ -475,18 +463,6 @@
\end{center}
\end{frame}
\begin{frame}{Test Results in Slave mode: Time deviation}
\begin{center}
\includegraphics[height=.85\textheight]{measurements/WRSlowJitter/slave_tdev.png}
\end{center}
\end{frame}
\begin{frame}{Test Results in Slave mode: Time error}
\begin{center}
\includegraphics[height=.85\textheight]{measurements/WRSlowJitter/slave_phase.png}
\end{center}
\end{frame}
\section{Current developments}
\subsection{}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment