Commit 0c316a0b authored by Adam Wujek's avatar Adam Wujek 💬 Committed by Grzegorz Daniluk

docs/specifications/management: update wrs_failures with ppsi jump

implemented WR-SWITCH-MIB::ppsiClockOffsetPsHR
Signed-off-by: Adam Wujek's avatarAdam Wujek <adam.wujek@cern.ch>
parent 9bb5dc70
...@@ -26,7 +26,7 @@ WR network.\\ ...@@ -26,7 +26,7 @@ WR network.\\
\item {\bf Offset jump not compensated by Slave} \item {\bf Offset jump not compensated by Slave}
\label{fail:timing:offset_jump} \label{fail:timing:offset_jump}
\begin{packed_enum} \begin{packed_enum}
\item [] \underline{Status}: TODO \emph{(depends on ppsi shm)} \item [] \underline{Status}: DONE
\item [] \underline{Severity}: ERROR \item [] \underline{Severity}: ERROR
\item [] \underline{Mode}: \emph{Slave} \item [] \underline{Mode}: \emph{Slave}
\item [] \underline{Description}:\\ \item [] \underline{Description}:\\
...@@ -34,9 +34,9 @@ WR network.\\ ...@@ -34,9 +34,9 @@ WR network.\\
lost the link to its Master higher in the hierarchy or to external lost the link to its Master higher in the hierarchy or to external
clock), but Slave switch does not follow the jump. clock), but Slave switch does not follow the jump.
\item [] \underline{SNMP objects}:\\ \item [] \underline{SNMP objects}:\\
\texttt{WR-SWITCH-MIB::ppsiClockOffsetPs} \emph{(implemented)}\\ \texttt{WR-SWITCH-MIB::ppsiClockOffsetPs}\\
\texttt{WR-SWITCH-MIB::ppsiClockOffsetPsHR} \emph{(not implemented, 32 bit signed human readable value)} \texttt{WR-SWITCH-MIB::ppsiClockOffsetPsHR}
\item [] \underline{Note}: add also 32-bit signed value of the offset. With saturation on overflow. \item [] \underline{Note}: HR version is 32-bit signed value of the offset. With saturation on overflow and underflow.
\end{packed_enum} \end{packed_enum}
\item {\bf Detected jump in the RTT value calculated by \emph{PPSI}} \item {\bf Detected jump in the RTT value calculated by \emph{PPSI}}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment