VentilatorPAL
Project description
VentilatorPAL offers a solution for the acute lack of respirators for COVID-19 patients around the world. Our mechanical assistant can only be used under supervision of a doctor.
VentilatorPAL is available as an open source low-cost DIY kit that can be assembled by anyone. The machine’s schematics, PCB layout and software can also be downloaded for free as an open source project. The firmware is not open but available for free as a binary.
The project is run by FreeBreathing.org and the VentilatorPAL was designed and built by Cosmicnode and Stogger, two Dutch tech companies who believe that everybody should have access to a ventilation aid in times of medical crisis. That is why they made a simple design that is open source, meaning it is affordable and easy to manufacture.
VentilatorPAL - open source respiratory aid
FRD-e is a commercial and medically certified version with upgraded build-quality that can be used in complement with high-end ventilators to free up capacity at the IC. The electronics of the FRD-e is the same as that of the VentilatorPAL. The FRD-e product is commercialized by Stogger Medical.
FRD-e - commercial respiratory aid
Main Features
- Power options
- Mains Power supply and/or External battery
- Internal emergency battery
- Control
- Human interface: Machine -and/or- mobile app
- Tidal Volume (TV)
- Inhale/Exhale ratio (I/E)
- Respiratory Rate (RR)
- Automatic calculation of tidal volume by gender and length by app control
- Design tools
- Mechanics: Solidworks
- Electronics: EagleCAD
- Firmware: MPLABX
- Licensed under CERN-OHL-S v2
- For more details: FreeBreathing.org and Stogger Medical
Project information
- Website: FreeBreathing.org
- VentilatorPAL Discourse forum
- Official production documentation
- Certification
- Files
- Video; Mechanical verification
- Video; Explanation by Hugo Touw MD Phd
- Frequently Asked Questions
Releases
- Mechanics: v2.0 - 22MB
- Electronics: v1.2 - 1.6MB
- Firmware: v1.19.1.11 - 545kB
- Software: v1.0 - 2.2MB
Contacts
Commercial producers
General questions about project
Status
Date | Event |
---|---|
17-03-2020 | Start working on project. Collecting main specifications. |
01-04-2020 | First version being prototyped. Electronics assembled. ohwr.org project started. |
07-04-2020 | Removed download links because of redesign requirements after prototype peer review. |
09-04-2020 | Updated texts, uploaded mechanics source |
20-04-2020 | PCBA EMC testing complete, pass |
26-04-2020 | Finished manuals, quick start guide, installation guide |
08-05-2020 | Finished pre volume batch (30pcs), sent out for review in nations in need |
09-05-2020 | Added PEEP and Plateau time to UI |
13-05-2020 | Wiki updated, added video and pictures |
13-05-2020 | Preparing for volume production |
15-05-2020 | Added new firmware and software links |