USB Relay Box 1 issueshttps://ohwr.org/project/usb-relay-box1/issues2019-02-12T11:00:06Zhttps://ohwr.org/project/usb-relay-box1/issues/1IC4 should be ADR444BRZ and not 4452019-02-12T11:00:06ZErik van der BijIC4 should be ADR444BRZ and not 445On the schematics as IC4 is shown as ADR445BRZ.
This one has a 5V output, but it is supplied with ~5V (USB) while it
should be 5.5 - 18V.
Actually a ADR444 should be mounted (with Vout = 4.096V) and not a
ADR445.
All produced modules have the ADR444.
- Correct schematics and BOM to show ADR444BRZ.
*Issue detected by Creotech*