Skip to content

S
Simple VME FMC Carrier 7 - SVEC7

Home

Last edited by Erik van der Bij
Page history
This is an old version of this page. You can view the most recent version or browse the history.

Simple VME FMC Carrier 7 (SVEC7)

Project description

The FMC VME Carrier is an FMC carrier in VME64x format that can hold two FMC cards and an SFP connector. Unlike on the SVEC, where it is based on, the FMC mezzanine slots use high-pin count (HPC) connectors. This board is optimised for cost and will be usable with most of the FMC cards designed within the OHR project (e.g. ADC cards, Fine Delay).

TEMPLATE BELOW


SVEC V1 production board - block diagram

Main Features

  • VME64x interface
  • Two Low-Pin Count FMC slots
    • Vadj fixed to 2.5V
    • No dedicated clock signals from Carrier to FMC (as only available on HPC pins and use LPC)
    • FMC connectivity: all 34 differential pairs connected, 1 GTP transceiver with clock, 2 clock pairs, JTAG, I2C
  • Xilinx FPGAs
    • Application FPGA: Spartan-6 XC6SLX150T-3FGG900C
      • Direct connection to all resources such as VME64x, memories and FMC connectors
    • System FPGA: Spartan-6 XC6SLX9-2FTG256C
      • Provides VME bootloader, early oscillator/PLL config
      • Configuration Flash memory for both Main FPGA and Application FPGA configuration
  • FPGA configuration
    • From SPI flash or via VME
  • Clocking resources
    • 1x 10-280 MHz I2C Programmable XO Oscillator, starts up at 100 MHz (Silicon Labs Si570, freely usable)
    • 1x 25 MHz TCXO controlled by a DAC with SPI interface (AD5662, used by White Rabbit PTP core)
    • 1x 20 MHz VCXO controlled by a DAC with SPI interface (AD5662, used by White Rabbit PTP core)
    • 2x low-jitter frequency synthesizer/fanout (TI CDCM61004, fixed configuration, Fout=125 MHz, used by White Rabbit PTP core)
  • On-board memories
    • 2x 256 MByte (2 Gbit) DDR3 (16-bit bus, MT41J128M16JT-125)
    • 1x 128 Mbit SPI flash for FPGA firmware storage (M25P128-VME6GB)
    • 64kbit EEPROM connected for storing application parameters (24AA64T-I/MC)
    • 1x I2C configuration EEPROM (24LC64)
  • Miscellaneous
    • On-board thermometer IC (DS18B20U+)
    • Unique 64-bit identifier (DS18B20U+)
  • Front panel
    • 1x SFP port (White Rabbit compatible)
    • 4x LEMO/SMC programmable I/Os capable of driving 3.3V @ 50 ohm
    • 2x mini displayPort connectors for high-speed serial GTP links (not for video)
    • 8x Programmable LED
    • Reset push button
  • Internal connectors
    • VME P2 connector provides access to a Rear Transition Module (compatible to VFC)
      • 40 user defined single ended (Vcco=2.5V) signals (or 20 LVDS pairs) connected to the Application FPGA
      • 2x 125 MHz LVDS clocks provided to the RTM
    • Xilinx-style JTAG connector
    • Internal mini USB 2.0 High Speed connector for stand-alone applications (CP2103)
  • Optional features, check with vendor
    • Internal 2 x SATA connector for stand-alone PCI Express connectivity (clock + data)
    • Internal 4 x UFL connectors with low-jitter clock for FMC cards
    • Internal additional USB 2.0 on 4-pin header (FT2232HL)
    • Battery for secure storage of FPGA configuration data
    • Stand-alone features
      • External supply connector (3.3V, 5V) on internal SATA connector
      • PCIe interface on internal SATA connector
  • 10-layer PCB

Project information

Releases

Latest:*

All Gateware releases:* See the Releases page.

Contacts

Commercial producers

  • none yet

General question about project

Status

Date Event
15-01-2019 Discussion on how SVEC can handle dual 1GSPS ADC mezzanines.
07-11-2019 Main features for SVEC7 decided. Design will be outsourced.