Altiumcustomize

Design Rule Verification Report

Date : 28/03/2019
Time : 11:56:11
Elapsed Time : 00:00:01
Filename : D:\APC\CTA\CAO\ticksopenhard\tiop.PcbDoc
Warnings : 0
Rule Violations : 20

Summary

Warnings Count
Total 0

Rule Violations Count
Clearance Constraint (Gap=0.125mm) (InPolygon),(All) 0
Width Constraint (Min=0.1mm) (Max=0.127mm) (Preferred=0.127mm) ((InDifferentialPairClass('All Differential Pairs'))) 0
Differential Pairs Uncoupled Length using the Gap Constraints (Min=0.114mm) (Max=0.14mm) (Preferred=0.254mm) (All) 20
Pads and Vias to follow the Drill pairs settings 0
Hole Size Constraint (Min=0.2mm) (Max=230mm) (All) 0
Broken-Net Constraint ( (All) ) 0
Short-Circuit Constraint (Allowed=No) (All),(All) 0
Power Plane Connect Rule(Relief Connect )(Expansion=0.3mm) (Conductor Width=0.127mm) (Air Gap=0.127mm) (Entries=4) (All) 0
Width Constraint (Min=0.1mm) (Max=2.54mm) (Preferred=0.127mm) (All) 0
Clearance Constraint (Gap=0.125mm) (All),(All) 0
Power Plane Connect Rule(Relief Connect )(Expansion=0.3mm) (Conductor Width=0.508mm) (Air Gap=0.254mm) (Entries=4) ((InPadClass('All Pads'))) 0
Clearance Constraint (Gap=0.125mm) (All),(All) 0
Total 20


Differential Pairs Uncoupled Length using the Gap Constraints (Min=0.114mm) (Max=0.14mm) (Preferred=0.254mm) (All)
Differential Pair LA30
Differential Pair LA23
Differential Pair LA22
Differential Pair LA14
Differential Pair LA12
Differential Pair LA11
Differential Pair LA08
Differential Pair LA03
Differential Pair LA00
Differential Pair SFPTX_123
Differential Pair SFPRX_123
Differential Pair CLK0_M2C
Differential Pair FPGA_PLL_REF_CLK_101
Differential Pair LA04
Differential Pair LA20
Differential Pair LA25
Differential Pair SI57X_CLK
Differential Pair FPGA_PLL_REF_CLK0_123
Differential Pair FPGA_CLK
Differential Pair SFP_CLK
Back to top