Skip to content

R
RF Multiplexer 8ch 1GHz
Commit 049528ae authored by Anders Wallin's avatar Anders Wallin
Browse files
Options

rescue lost symbols (kicad-5 libs!?) on schematic

parent 76d8b1fd
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 1466 additions and 1246 deletions
mux/rf_mux_8ch_2018.02.kicad_pcb
View file @ 049528ae
......@@ -7725,7 +7725,7 @@
)
(module Symbols:OSHW-Logo2_14.6x12mm_SilkScreen (layer F.Cu) (tedit 0) (tstamp 5A5DDD64)
(at 140 82.5)
(at 86.25 103)
(descr "Open Source Hardware Symbol")
(tags "Logo Symbol OSHW")
(attr virtual)
......@@ -9878,7 +9878,7 @@
(arrow2a (pts (xy 36 125) (xy 36.586421 123.873496)))
(arrow2b (pts (xy 36 125) (xy 35.413579 123.873496)))
)
(gr_text "1:8 RF MUX 2018.08\nLicensed under CERN OHL v.1.2 or later\n\nhttp://ohwr.org/cernohl\nDesign Anders Wallin 2018-08" (at 82 115) (layer F.SilkS)
(gr_text "1:8 RF MUX 2018.08\nLicensed under CERN OHL v.1.2 or later\n\nhttp://ohwr.org/cernohl\nDesign Anders Wallin 2018-08" (at 79.75 115.25) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.25)) (justify left))
)
(gr_text "Saturn PCB Toolkit V7.02\nConductor Impedance\nWidth 1.2 mm\nPCB Height 1.55mm FR4 ER=4.6 (W/H 0.77)\nGap 0.2 mm\nImpedance 50.095 Ohm" (at 230 120) (layer Dwgs.User)
......@@ -9894,7 +9894,7 @@
(gr_text "Copyright Anders E. E. Wallin 2018.\n\nThis documentation describes Open Hardware and is licensed under the\nCERN OHL v. 1.2.\nYou may redistribute and modify this documentation under the terms of the\nCERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed\nWITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF\nMERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A\nPARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable\nconditions" (at 80 178) (layer Dwgs.User)
(effects (font (size 1.5 1.5) (thickness 0.3)) (justify left))
)
(gr_text "This board controlled over SPI.\n\nFor Ethernet-control use e.g. Arduino Due\nwith Ethernet shield.\n\nFront panel ETH-jack e.g.\nMulticomp MC8533-6201 \n\nPower Supply e.g.\n9V 15W AC/DC brick, XP Power EML-series\nDigikey 1470-2615-ND\n\nAC Power entry connector with fuse/switch/filter\ne.g. Schurter DD12 series\nFarnell 1430802" (at 225 35) (layer Dwgs.User)
(gr_text "This board controlled over SPI.\n\nFor Ethernet-control use e.g. Arduino Due\nor Arduino MKR\nwith Ethernet shield.\n\nFront panel ETH-jack e.g.\nMulticomp MC8533-6201 \n\nPower Supply e.g.\n9V 15W AC/DC brick, XP Power EML-series\nDigikey 1470-2615-ND\n\nAC Power entry connector with fuse/switch/filter\ne.g. Schurter DD12 series\nFarnell 1430802" (at 225 35) (layer Dwgs.User)
(effects (font (size 1.5 1.5) (thickness 0.3)) (justify left))
)
(gr_text "front panel LED hole placement:\nBNCcenter - PCBtopside = 8,56\nPCBtopside-botside = 1,6\nPCBbotside - LED = 1,0\nsum BNCcenter - LED = 11,16" (at 16 30) (layer Dwgs.User)
......
mux/rf_mux_8ch_v2-cache.lib 0 → 100644
View file @ 049528ae
EESchema-LIBRARY Version 2.4
#encoding utf-8
#
# Connector_Conn_Coaxial
#
DEF Connector_Conn_Coaxial J 0 40 Y N 1 F N
F0 "J" 10 120 50 H V C CNN
F1 "Connector_Conn_Coaxial" 115 0 50 V V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
*BNC*
*SMA*
*SMB*
*SMC*
*Cinch*
$ENDFPLIST
DRAW
A -2 0 71 1636 0 0 1 10 N -70 20 70 0
A -1 0 71 0 -1638 0 1 10 N 70 0 -70 -20
C 0 0 20 0 1 8 N
P 2 0 1 0 -100 0 -20 0 N
P 2 0 1 0 0 -100 0 -70 N
X In 1 -200 0 100 R 50 50 1 1 P
X Ext 2 0 -200 100 U 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Connector_Generic_Conn_02x05_Odd_Even
#
DEF Connector_Generic_Conn_02x05_Odd_Even J 0 40 Y N 1 F N
F0 "J" 50 300 50 H V C CNN
F1 "Connector_Generic_Conn_02x05_Odd_Even" 50 -300 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Connector*:*_2x??_*
$ENDFPLIST
DRAW
S -50 -195 0 -205 1 1 6 N
S -50 -95 0 -105 1 1 6 N
S -50 5 0 -5 1 1 6 N
S -50 105 0 95 1 1 6 N
S -50 205 0 195 1 1 6 N
S -50 250 150 -250 1 1 10 f
S 150 -195 100 -205 1 1 6 N
S 150 -95 100 -105 1 1 6 N
S 150 5 100 -5 1 1 6 N
S 150 105 100 95 1 1 6 N
S 150 205 100 195 1 1 6 N
X Pin_1 1 -200 200 150 R 50 50 1 1 P
X Pin_10 10 300 -200 150 L 50 50 1 1 P
X Pin_2 2 300 200 150 L 50 50 1 1 P
X Pin_3 3 -200 100 150 R 50 50 1 1 P
X Pin_4 4 300 100 150 L 50 50 1 1 P
X Pin_5 5 -200 0 150 R 50 50 1 1 P
X Pin_6 6 300 0 150 L 50 50 1 1 P
X Pin_7 7 -200 -100 150 R 50 50 1 1 P
X Pin_8 8 300 -100 150 L 50 50 1 1 P
X Pin_9 9 -200 -200 150 R 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Connector_TestPoint_2Pole
#
DEF Connector_TestPoint_2Pole TP 0 30 Y N 1 F N
F0 "TP" 0 60 50 H V C CNN
F1 "Connector_TestPoint_2Pole" 0 -70 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Pin*
Test*
$ENDFPLIST
DRAW
C -70 0 30 0 1 0 N
C 70 0 30 0 1 0 N
X 1 1 -200 0 100 R 50 50 0 1 P
X 2 2 200 0 100 L 50 50 0 1 P
ENDDRAW
ENDDEF
#
# Device_C
#
DEF Device_C C 0 10 N Y 1 F N
F0 "C" 25 100 50 H V L CNN
F1 "Device_C" 25 -100 50 H V L CNN
F2 "" 38 -150 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
C_*
$ENDFPLIST
DRAW
P 2 0 1 20 -80 -30 80 -30 N
P 2 0 1 20 -80 30 80 30 N
X ~ 1 0 150 110 D 50 50 1 1 P
X ~ 2 0 -150 110 U 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Device_LED
#
DEF Device_LED D 0 40 N N 1 F N
F0 "D" 0 100 50 H V C CNN
F1 "Device_LED" 0 -100 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
LED*
LED_SMD:*
LED_THT:*
$ENDFPLIST
DRAW
P 2 0 1 8 -50 -50 -50 50 N
P 2 0 1 0 -50 0 50 0 N
P 4 0 1 8 50 -50 50 50 -50 0 50 -50 N
P 5 0 1 0 -120 -30 -180 -90 -150 -90 -180 -90 -180 -60 N
P 5 0 1 0 -70 -30 -130 -90 -100 -90 -130 -90 -130 -60 N
X K 1 -150 0 100 R 50 50 1 1 P
X A 2 150 0 100 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Device_L_Small
#
DEF Device_L_Small L 0 10 N N 1 F N
F0 "L" 30 40 50 H V L CNN
F1 "Device_L_Small" 30 -40 50 H V L CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Choke_*
*Coil*
Inductor_*
L_*
$ENDFPLIST
DRAW
A 0 -60 20 -899 899 0 1 0 N 0 -80 0 -40
A 0 -20 20 -899 899 0 1 0 N 0 -40 0 0
A 0 20 20 -899 899 0 1 0 N 0 0 0 40
A 0 60 20 -899 899 0 1 0 N 0 40 0 80
X ~ 1 0 100 20 D 50 50 1 1 P
X ~ 2 0 -100 20 U 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Device_R
#
DEF Device_R R 0 0 N Y 1 F N
F0 "R" 80 0 50 V V C CNN
F1 "Device_R" 0 0 50 V V C CNN
F2 "" -70 0 50 V I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
R_*
$ENDFPLIST
DRAW
S -40 -100 40 100 0 1 10 N
X ~ 1 0 150 50 D 50 50 1 1 P
X ~ 2 0 -150 50 U 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Interface_Expansion_MCP23S17_SO
#
DEF Interface_Expansion_MCP23S17_SO U 0 40 Y Y 1 F N
F0 "U" -450 950 50 H V C CNN
F1 "Interface_Expansion_MCP23S17_SO" 0 0 50 H V C CNN
F2 "Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm" 200 -1000 50 H I L CNN
F3 "" 200 -1100 50 H I L CNN
$FPLIST
SOIC*7.5x17.9mm*P1.27mm*
$ENDFPLIST
DRAW
S -500 900 500 -900 0 1 10 f
X GPB0 1 700 800 200 L 50 50 1 1 B
X VSS 10 0 -1100 200 U 50 50 1 1 W
X ~CS~ 11 -700 800 200 R 50 50 1 1 I
X SCK 12 -700 700 200 R 50 50 1 1 I
X SI 13 -700 600 200 R 50 50 1 1 I
X SO 14 -700 500 200 R 50 50 1 1 O
X A0 15 -700 -800 200 R 50 50 1 1 I
X A1 16 -700 -700 200 R 50 50 1 1 I
X A2 17 -700 -600 200 R 50 50 1 1 I
X ~RESET~ 18 -700 -100 200 R 50 50 1 1 I
X INTB 19 -700 200 200 R 50 50 1 1 T
X GPB1 2 700 700 200 L 50 50 1 1 B
X INTA 20 -700 100 200 R 50 50 1 1 T
X GPA0 21 700 -100 200 L 50 50 1 1 B
X GPA1 22 700 -200 200 L 50 50 1 1 B
X GPA2 23 700 -300 200 L 50 50 1 1 B
X GPA3 24 700 -400 200 L 50 50 1 1 B
X GPA4 25 700 -500 200 L 50 50 1 1 B
X GPA5 26 700 -600 200 L 50 50 1 1 B
X GPA6 27 700 -700 200 L 50 50 1 1 B
X GPA7 28 700 -800 200 L 50 50 1 1 B
X GPB2 3 700 600 200 L 50 50 1 1 B
X GPB3 4 700 500 200 L 50 50 1 1 B
X GPB4 5 700 400 200 L 50 50 1 1 B
X GPB5 6 700 300 200 L 50 50 1 1 B
X GPB6 7 700 200 200 L 50 50 1 1 B
X GPB7 8 700 100 200 L 50 50 1 1 B
X VDD 9 0 1100 200 D 50 50 1 1 W
ENDDRAW
ENDDEF
#
# Mechanical_MountingHole_Pad
#
DEF Mechanical_MountingHole_Pad H 0 40 N N 1 F N
F0 "H" 0 250 50 H V C CNN
F1 "Mechanical_MountingHole_Pad" 0 175 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
MountingHole*Pad*
$ENDFPLIST
DRAW
C 0 50 50 0 1 50 N
X 1 1 0 -100 100 U 50 50 1 1 I
ENDDRAW
ENDDEF
#
# Transistor_Array_ULN2803A
#
DEF Transistor_Array_ULN2803A U 0 20 Y Y 1 F N
F0 "U" 0 525 50 H V C CNN
F1 "Transistor_Array_ULN2803A" 0 450 50 H V C CNN
F2 "" 50 -650 50 H I L CNN
F3 "" 100 -200 50 H I C CNN
ALIAS ULN2802A ULN2801A ULN2804A ULN2805A
$FPLIST
DIP*W7.62mm*
SOIC*7.5x11.6mm*P1.27mm*
$ENDFPLIST
DRAW
C -70 200 10 0 1 0 N
C -50 -90 10 0 1 0 F
C -50 0 10 0 1 0 F
C -50 100 10 0 1 0 F
C -20 200 10 0 1 0 F
S -300 -600 300 400 0 1 10 f
P 2 0 1 0 -180 200 -140 200 N
P 2 0 1 0 -60 200 160 200 N
P 2 0 1 0 0 265 -40 265 N
P 3 0 1 0 -20 200 -20 300 90 300 N
P 4 0 1 0 -140 240 -140 160 -80 200 -140 240 N
P 4 0 1 0 0 235 -40 235 -20 265 0 235 N
X I1 1 -400 200 100 R 50 50 1 1 I
X COM 10 400 300 100 L 50 50 1 1 P
X O8 11 400 -500 100 L 50 50 1 1 C
X O7 12 400 -400 100 L 50 50 1 1 C
X O6 13 400 -300 100 L 50 50 1 1 C
X O5 14 400 -200 100 L 50 50 1 1 C
X O4 15 400 -100 100 L 50 50 1 1 C
X O3 16 400 0 100 L 50 50 1 1 C
X O2 17 400 100 100 L 50 50 1 1 C
X O1 18 400 200 100 L 50 50 1 1 C
X I2 2 -400 100 100 R 50 50 1 1 I
X I3 3 -400 0 100 R 50 50 1 1 I
X I4 4 -400 -100 100 R 50 50 1 1 I
X I5 5 -400 -200 100 R 50 50 1 1 I
X I6 6 -400 -300 100 R 50 50 1 1 I
X I7 7 -400 -400 100 R 50 50 1 1 I
X I8 8 -400 -500 100 R 50 50 1 1 I
X GND 9 0 -700 100 U 50 50 1 1 W
ENDDRAW
ENDDEF
#
# awallin_RELAY_SPDT_HF3
#
DEF awallin_RELAY_SPDT_HF3 U 0 40 Y Y 1 F N
F0 "U" 0 -525 60 H V C CNN
F1 "awallin_RELAY_SPDT_HF3" -25 550 60 H V C CNN
F2 "" 0 0 60 H I C CNN
F3 "" 0 0 60 H I C CNN
DRAW
S -400 500 350 -450 0 1 0 N
P 2 0 1 0 -375 0 50 0 N
P 2 0 1 0 75 150 75 0 N
P 2 0 1 0 100 0 100 -150 N
P 3 0 1 0 350 -200 275 -150 125 -150 N
P 3 0 1 0 350 200 300 150 125 150 N
X COIL+ 1 -600 400 200 R 50 50 1 1 I
X GND 10 -600 -300 200 R 50 50 1 1 I
X COIL- 11 -600 -400 200 R 50 50 1 1 I
X GND 12 550 -400 200 L 50 50 1 1 I
X GND 13 550 -300 200 L 50 50 1 1 I
X SW2_(NO) 14 550 -200 200 L 50 50 1 1 I
X GND 15 550 -100 200 L 50 50 1 1 I
X GND 17 550 0 200 L 50 50 1 1 I
X GND 19 550 100 200 L 50 50 1 1 I
X GND 2 -600 300 200 R 50 50 1 1 I
X SW1_(NC) 20 550 200 200 L 50 50 1 1 I
X GND 21 550 300 200 L 50 50 1 1 I
X GND 22 550 400 200 L 50 50 1 1 I
X GND 5 -600 100 200 R 50 50 1 1 I
X COM 6 -600 0 200 R 50 50 1 1 I
X GND 7 -600 -100 200 R 50 50 1 1 I
ENDDRAW
ENDDEF
#
# power_GND
#
DEF power_GND #PWR 0 0 Y Y 1 F P
F0 "#PWR" 0 -250 50 H I C CNN
F1 "power_GND" 0 -150 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
DRAW
P 6 0 1 0 0 0 0 -50 50 -50 0 -100 -50 -50 0 -50 N
X GND 1 0 0 0 D 50 50 1 1 W N
ENDDRAW
ENDDEF
#
#End Library
mux/rf_mux_8ch_v2.sch
View file @ 049528ae
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment