README.txt 920 Bytes
Newer Older
Anders Wallin's avatar
Anders Wallin committed
1
This is the README.txt for the 1:8 RF Multiplexer open hardware
Anders Wallin's avatar
Anders Wallin committed
2
design hosted at https://www.ohwr.org/project/rf-mux-8ch
3
Anders Wallin (anders.e.e.wallin "at" gmail.com), June 2018.
Anders Wallin's avatar
Anders Wallin committed
4 5 6 7
For licensing see LICENSE.txt

project contents:

8
/mux         KiCad mux-board schematic and PCB design.
Anders Wallin's avatar
Anders Wallin committed
9

Anders Wallin's avatar
Anders Wallin committed
10 11 12
/mux-sw_MKR_ZERO   Arduino MKR ZERO firmware
             Uses Ethernet shield and MKR Zero carrier board SPI-connections
             to the MUX-board
Anders Wallin's avatar
Anders Wallin committed
13

14 15 16
/enclosure   Enclosure design. 19" 1U, 200mm depth.
             Designed with Schaeffer Front Panel Designer
             https://www.schaeffer-ag.de/en/
Anders Wallin's avatar
Anders Wallin committed
17

18
/scripts     Python-scripts for driving the mux over Ethernet.
Anders Wallin's avatar
Anders Wallin committed
19 20 21 22 23

Older versions used an Arduino Due controller:
/mux-sw      Arduino Due firmware
             written for Arduino Due with Ethernet Shield

24 25
/due2sata    KiCad schematic and PCB design for Arduino Due 
             IO-connector to SATA-connector beakout board