Update sfp_lib.h and hal_shmem.h to support diagnostics (DOM) in SFPs.
Changes not affecting PPSI code.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

There were many changes to the ppsi structures in few previous commits.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

bug introduced in 4126868c, we were incrementing the delay-request
sequence number instead of ours.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

The function has gone big over time, it's better not inline any more.
The change saves 230 byte in wrpc builds.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

While it may make sense to setup constant delay somewhere (for WR we
define them, for instance), the legacy implementation was unused and
wrong.

Unused because nobody sets it (even if we could do it in the config
file).  Wrong because inbound is never used, and both are global and
not per-port.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Now this is the behaviour for the choice:

    arch-bare-*

         if you select P2P, it's built and selected. Default is E2E_ONLY.

    arch-sim
    arch-unix
    arch-wrs

         The P2P is built by default configuration, and the mechanism
         is selected at configuration time. Default is E2E. If you
         choose E2E_ONLY and configure pdelay, it will ignore the config.
         (Suboptimal but I'm lazy: do *not* use E2E_ONLY for those archs.

    arch-wrpc

        The default is e2e until changed at run time.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Uplift shmem from wr-switch-sw repo.
Fix previous uplift of shmem and improve debug printout.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Commit based on the commit from wrs-switch-sw described below.

userspace/libwr: printout more details when wrs_shm_write is called

It might be usefull to know whether caller wanted to lock or unlock the shmem
and which shmem.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

Commit based on the commit from wrs-switch-sw described below.
Apply changes to the arch-wrs/wrs-startup.c to follow declaration change of
wrs_shm_alloc.

userspace/libwr: in shmem, use pointers to structs intead of void pointers

In shared memory functions take as parameters pinters to structures instead
of void pointers. By this compiler will warn when wrong type of pointer is
passed. For example when pointer to the data in shmem is passed instead of
pointer to the header.
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

The commit:
15076cb6 arch-wrs: improve locking of shmem
didn't fully apply the patch from the wr-switch repo.
This commit apply changes to arch-wrs/shmem.c that were missed
Signed-off-by: Adam Wujek <adam.wujek@cern.ch>

This shrinks p2p builds by 100 bytes, but increases by 100 bytes
the wrpc defconfig (the one withouth P2P code).
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This saves 50 bytes in wrpc-sw (and more in x86 builds)
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Here in ppsi,

  ./MAKEALL wrpc_defconfig wrpc_pdelay_defconfig

shows a very small difference, but most pdelay code is then
discarded by the wrpc-sw link time, due to --gc-sections.
This is the result:

   laptopo% ./MAKEALL spec_defconfig spec_pdelay_defconfig
   ##### Building with 'spec_defconfig'
   /opt/lm32-gcc-4.5.3/bin/lm32-elf-ar: creating libsdbfs.a
      text    data     bss     dec     hex filename
     87688    3492    6352   97532   17cfc wrc.elf
   ##### Building with 'spec_pdelay_defconfig'
   /opt/lm32-gcc-4.5.3/bin/lm32-elf-ar: creating libsdbfs.a
      text    data     bss     dec     hex filename
     93140    3492    6360  102992   19250 wrc.elf

What is missing now is the run-time choice between e2e and p2p. Later....
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

There is a size problem in wrpc-sw, when built with SNMP inside, so
some users, notably CERN, want to avoid the pdelay code (allegedly 7kB
in the binary).

Users who need pdelay don't actually run SNMP, so they don't have the
size problem.  This new setup allows a wrpc-sw without pdelay-related
code.  Wrpc with both mechanisms built in will be run-time configurable.

the wrs and unix configurations for peer delay are removed, because
for those architecture the choice is going to be performed at run time,
in the configuration file.

Please note that this commit is config-only, no code yet is there.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Using a data-driven approach to manage incoming frames is definitely
cleaner and clearer.  It even has a (very minor) size reduction for wrpc.

I plan to use this approach overall, as time permits.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

This won't work, because packets must be sent to two different
IP multicast addresses. This is not supported.  The code being disabled
had the effect of setting the pdelay destination for all frames, even
for E2E runs.

This fixes E2E UDP operation, leaving P2P broken as it was.
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

If no follow-up is to be received, we trigger pp_servo_got_presp()
on reception of peer delay response.

In this case we also possibly have switch to port state to PASSIVE.

A function should only do what it promises, so msg_unpack_header should
just unpack. This move also gets also us ready for fixing compliance
to 9.5.2.3.

This gets us ready for leaving a state as a consequence of filtered out
messages (9.5.2.3: discard announce AND switch state to PASSIVE).

    See Table 13.
    Note that we keep currentUtcOffset as it is and reset currentUtcOffsetValid,
    because  we presently don't know about leap seconds.
    leap59 and leap61 are forced to zero.

See Table 13.

See Table 20.

We don't support alternate masters at present.

We're not a transparent clock, so this should be ok.