High performance 8-channel Pulse and Frequency distribution amplifier
This 1U 19" rack project houses two boards, one 8-channel logic-pulse distribution amplifier (pda) board (e.g. for 1 pulse-per-second signals) and one 8-channel frequency distribution (fda) amplifier for typically 5 or 10 MHz sine-wave signal.
Frequency Distribution Amplifier
- 2-sided PCB, 170 mm x 70 mm
- Input stage LMH6702
- Output stages LMH6609
FDA to-do list for future releases
- level detector? (logic-pin or LED to indicate presence of signal)
Pulse Distribution Amplifier
- 2-sided PCB, 170 mm x 70 mm
Enclosure and powersupply
Two boards fit side-by-side an a 1U high 19" rack enclosure.
The distance between connectors on the front panel is 16 mm, leaving
enough room for BNC connectors and cables.
Other similar projects
A list of free or commercial designs where at least some design and performance information is available.
- TAPR TADD-1 https://www.tapr.org/kits_tadd-1.html
- 1:6 frequency distribution amplifier, uses AD8055 op-amp
- TAPR TADD-3 https://www.tapr.org/kits_tadd-3.html
- 1:6 pulse distribution amplifier using 74AC04 and 74AC14 gates
- Ettus OctoClock https://www.ettus.com/product/details/OctoClock
- CASPER 16-way 1PPS driver
-
An Octal 10 MHz Distribution
Amplifier
- uses LMH6723