# carrier_csr

### Carrier control and status registers

Wishbone slave for control and status registers related to the FMC carrier

### Contents:

1. Memory map summary
2. HDL symbol
3. Register description
3.1. Carrier type and PCB version
3.2. Status
3.3. Control
3.4. Reset Register

### 1. Memory map summary

H/W Address | Type | Name | VHDL/Verilog prefix | C prefix
--- | --- | --- | --- | ---
0x0 | REG | Carrier type and PCB version | carrier_csr_carrier | CARRIER
0x1 | REG | Status | carrier_csr_stat | STAT
0x2 | REG | Control | carrier_csr_ctrl | CTRL
0x3 | REG | Reset Register | carrier_csr_rst | RST

### 2. HDL symbol

→ | rst_n_i |  | Carrier type and PCB version: |
→ | clk_sys_i |  | carrier_csr_carrier_pcb_rev_i[3:0] | ⇐
⇒ | wb_adr_i[1:0] |  | carrier_csr_carrier_reserved_i[11:0] | ⇐
⇒ | wb_dat_i[31:0] |  | carrier_csr_carrier_type_i[15:0] | ⇐
⇐ | wb_dat_o[31:0] |  |  |
→ | wb_cyc_i |  | Status: |
⇒ | wb_sel_i[3:0] |  | carrier_csr_stat_fmc_pres_i | ←
→ | wb_stb_i |  | carrier_csr_stat_p2l_pll_lck_i | ←
→ | wb_we_i |  | carrier_csr_stat_sys_pll_lck_i | ←
← | wb_ack_o |  | carrier_csr_stat_ddr3_cal_done_i | ←
← | wb_stall_o |  |  |
|  |  | Control: |
|  |  | carrier_csr_ctrl_led_green_o | →
|  |  | carrier_csr_ctrl_led_red_o | →
|  |  | carrier_csr_ctrl_dac_clr_n_o | →
|  |  | Reset Register: |
|  |  | carrier_csr_rst_fmc0_n_o | →
|  |  | carrier_csr_rst_fmc0_n_i | ←
|  |  | carrier_csr_rst_fmc0_n_load_o | →

### 3. Register description

### 3.1. Carrier type and PCB version

HW prefix: | carrier_csr_carrier
HW address: | 0x0
C prefix: | CARRIER
C offset: | 0x0

31 | 30 | 29 | 28 | 27 | 26 | 25 | 24
TYPE[15:8] |  |  |  |  |  |  |

23 | 22 | 21 | 20 | 19 | 18 | 17 | 16
TYPE[7:0] |  |  |  |  |  |  |

15 | 14 | 13 | 12 | 11 | 10 | 9 | 8
RESERVED[11:4] |  |  |  |  |  |  |

7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
RESERVED[3:0] | PCB_REV[3:0] |  |  |  |  |  |

- PCB_REV [read-only]: PCB revision
  Binary coded PCB layout revision.
- RESERVED [read-only]: Reserved register
  Ignore on read, write with 0's.
- TYPE [read-only]: Carrier type
  Carrier type identifier
  1 = SPEC
  2 = SVEC
  3 = VFC
  4 = SPEXI

### 3.2. Status

HW prefix: | carrier_csr_stat
HW address: | 0x1
C prefix: | STAT
C offset: | 0x4

31 | 30 | 29 | 28 | 27 | 26 | 25 | 24
- | - | - | - | - | - | - | -

23 | 22 | 21 | 20 | 19 | 18 | 17 | 16
- | - | - | - | - | - | - | -

15 | 14 | 13 | 12 | 11 | 10 | 9 | 8
- | - | - | - | - | - | - | -

7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
- | - | - | - | DDR3_CAL_DONE | SYS_PLL_LCK | P2L_PLL_LCK | FMC_PRES

- FMC_PRES [read-only]: FMC presence
  0: FMC slot is populated
  1: FMC slot is not populated.
- P2L_PLL_LCK [read-only]: GN4142 core P2L PLL status
  0: not locked
  1: locked.
- SYS_PLL_LCK [read-only]: System clock PLL status
  0: not locked
  1: locked.
- DDR3_CAL_DONE [read-only]: DDR3 calibration status
  0: not done
  1: done.

### 3.3. Control

HW prefix: | carrier_csr_ctrl
HW address: | 0x2
C prefix: | CTRL
C offset: | 0x8

31 | 30 | 29 | 28 | 27 | 26 | 25 | 24
- | - | - | - | - | - | - | -

23 | 22 | 21 | 20 | 19 | 18 | 17 | 16
- | - | - | - | - | - | - | -

15 | 14 | 13 | 12 | 11 | 10 | 9 | 8
- | - | - | - | - | - | - | -

7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
- | - | - | - | - | DAC_CLR_N | LED_RED | LED_GREEN

- LED_GREEN [read/write]: Green LED
  Manual control of the front panel green LED (unused in the fmc-adc application)
- LED_RED [read/write]: Red LED
  Manual control of the front panel red LED (unused in the fmc-adc application)
- DAC_CLR_N [read/write]: DAC clear
  Active low clear signal for VCXO DACs

### 3.4. Reset Register

HW prefix: | carrier_csr_rst
HW address: | 0x3
C prefix: | RST
C offset: | 0xc

Controls software reset of the mezzanine including the ddr interface and the time-tagging core.

31 | 30 | 29 | 28 | 27 | 26 | 25 | 24
- | - | - | - | - | - | - | -

23 | 22 | 21 | 20 | 19 | 18 | 17 | 16
- | - | - | - | - | - | - | -

15 | 14 | 13 | 12 | 11 | 10 | 9 | 8
- | - | - | - | - | - | - | -

7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
- | - | - | - | - | - | - | FMC0_N

- FMC0_N [read/write]: State of the reset line
  write 0: FMC is held in reset
  write 1: Normal FMC operation (default)