Hopefully all right.

Added packages for chips used in the SFP fanout (DUNE). I should put those in a separate repository.

Basic LED control now working. Use pwdled.setIndicatorRGB(XX, [A, B, C]) to set indicator XX to RGB components A, B, C.

Added i2c sintruction in the interface to send single commands to the i2c display. In the future it can be changed to send instructions to other devices, if needed. Still work in progress.

Changed constraint file to remove timing error on trigger inputs. Fixed a bug in EUDET mode that caused the trigger numbers to not be registered correctly and thus sending wrong trigger numbers to the DUT, especially when the number was odd

Dummy_DUT now works. The fifo is still work in progress but the extended BUSY line seems to work fine. Currently DUT 1 and 2 have extended BUSY (about 800 us) while 3 and 4 have normal BUSY

Fixed but where DUTMask only affected AIDA mode. Now devices in EUDET mode will also be disabled by the mask.

Fixed some bugs in the PythonScripts, including wrong clock configuration while using the command shell (the clock was never stopped)