version 20: trigger ID is not reset for "next run"
The TriggerID on the SPARE line as well in the TLU data is not reset, when stop, re-start, re-configure or reset and re-init (EUDAQ commands) at the moment. After a re-start the TriggerID is incrementing from the number at which it has stopped before. Only after a power cycle or firmware reset/upload the counters (see issue#2) are reset. --> General EUDAQ rule: For a new run, all counters should be reset.
From "Summary of testing the AIDA-TriggerID mode (DUTMaskMode: b01) fw-v20 with EUDAQ2 (master) and MimosaDAQ/NiProducer from 16th April 2019"