A Lemo-0 connector, optionally used for the reception of an input
synchronization trigger pulse, usually from CERN's timing board
An EEPROM chip, loaded with IPMI FRU information, and a 1-wire
thermometer-unique-id-chip, so as to comply with the FMC standard.
The schematics of the board, drawn in Altium, are available at CERN's
EDMS. As the following table
shows, three versions of the board have been designed.
A list of issues that were being identified and led to the development
of a new version is available in the issues
tab of this
Different board executions exist depending on the WorldFIP communication
speed: 31.25kbps, 1Mbps, 2.5Mbps, and 5Mbps; a set of ten components
differentiates the board executions.