FMC High-Voltage Supply (fmc-hv-2ch)
Project description
The FMC-HV-2CH is an FMC card with a Low Pin Count (LPC) connector that accommodates multiple different High voltage or Low voltage outputs to suit the specific application. It can be assembled with different components to have different high-voltage ranges (e.g. -600V or +2 kV). Based on DC/DC power converter modules from XP Power.
Below is a template. Please update using the recommended setup and usage guide
Main Features
- 2 High Voltage outputs
- Slim SHV Safe High Voltage connectors, Part Number 51494-2
- Programmable with 16-bit DAC.
- Example: Vout max 3000V, resolution 26.7 mV
- 2 Low Voltage outputs
- LEMO connectors
- One fixed 12V
- One programmable (5-12 V)
- mV voltage sensing and mA current sensing capabilities
- overvoltage protection
- Different voltage ranges possible at assembly
- Only need to change DC/DC converter and Amplifier gain resistances for different applications
- FMC card with low pin count (LPC) connector
- Vadj fixed to 3.3V
- Optimised for cost
- 4-layer PCB
Project information
- Official production documentation: EDMS EDA-
- Block diagram
- Design manual on the high voltage FMC mezzanine
- Users
- Software
- Frequently Asked Questions
Contacts
Commercial producers
- Not yet commercially available.
General questions about project
- William Vigano' - CERN
Status
Date | Event |
---|---|
06-09-2021 | Start working on project. Collecting main specifications. |
06-10-2021 | PCB layout started |
6 October 2021