Patch panel
Main features
- 2U 19-inch rack size
- at the back-plane: one 50 Ohm BNC connector per input, one lemo-00 connector per output
- Handles two FMC DIO 10I8O with two FCS8-20-01-L-S-A-TR connectors
- LCD and LEDs programmable by I2C
- Compatible with the FASEC using a RJ12 6P6C connector
- 6 buttons connected to I2C I/O expander TCA9539PWR
- 40 leds for each I/O
- Power supply either from the RJ12 6P6C and/or Micro-USB (GCT_USB3131-30-0230)
Releases
Note that there's Vx-0 and Vx-1 boards which are the same boards but with a different BOM so that J26 can be used to interconnect the top and bottom board. There's also some mounted resistance difference to differentiate the I2C device addresses.
- Hardware:
-
EDA-03388-V2 - obsolete now
- production problems, random shorts, as such the copper to TH Pad clearance was increased from 0.15mm -> 0.3mm
- D1-3 changed
- copper polygon added to the top for better symmetric material distribution
- EDA-03388-V3
-
EDA-03388-V2 - obsolete now