tools/sdbfs: updated to new fdelay setup

The example files and configuration matches what is current in the fdelay driver, to be released soon after this very package. Signed-off-by: Alessandro Rubini <rubini@gnudd.com>

tools/sdbfs: updated to new fdelay setup
The example files and configuration matches what is current in the fdelay driver, to be released soon after this very package. Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
9ea8a363 · Alessandro Rubini · 2ab5e486 · 9ea8a363 · 9ea8a363 · 9ea8a363
Commit 9ea8a363 authored Apr 29, 2013 by Alessandro Rubini
Hide whitespace changes
Inline Side-by-side

Showing with 13 additions and 5 deletions

--SDB-CONFIG-- tools/sdbfs/--SDB-CONFIG-- +13 -4

IPMI-FRU tools/sdbfs/IPMI-FRU +0 -0

calibration tools/sdbfs/calibration +0 -0

fd-calib tools/sdbfs/fd-calib +0 -1

No files found.
--- a/tools/sdbfs/--SDB-CONFIG--
+++ b/tools/sdbfs/--SDB-CONFIG--
@@ -12,8 +12,8 @@
 # The IPMI-FRU material is in the "IPMI-FRU" file. It has been
 # generated using ../fru-generator like this:
 #
-# ../fru-generator -v CERN -n FmcDelay1ns4cha -s proto-0 \
-#   -p EDA-02267-V3 > IPMI-FRU
+# ../fru-generator -v "INCAA Computers BV" -n FmcDelay1ns4cha -s 123_123 \
+#   -p EDA-02267-V5-2 > IPMI-FRU

 IPMI-FRU
 	position = 0
@@ -21,8 +21,17 @@ IPMI-FRU
 # we have a "name" file, that includes "fdelay". But no configuration is
 # needed.

-# Finally, the fine-delay wants configuration at offset 0x1800, because
-# SDB was added to the drivers later, and initially a known address was
+# We also have a "calibration" file, that new fdelay drivers look for in the
+# sdb structures. So there is no configuration for this item in here.
+
+
+# What follows is no longer current, but I keep it for explanatory
+# purposes.  This is something you can use if your driver doesn't rely
+# on SDB to find the data but you still want to use it to generate the
+# data.
+#
+# Older fdelay drivers wanted configuration at offset 0x1800, because
+# SDB was not supported, and initially a known address was
 # used. So prepare a writable file in there. The driver looks for "fd-c".
 # The size of calibration information is around 100 bytes.


--- a/tools/sdbfs/IPMI-FRU
+++ b/tools/sdbfs/IPMI-FRU
--- a/tools/sdbfs/calibration
+++ b/tools/sdbfs/calibration
--- a/tools/sdbfs/fd-calib
+++ b/tools/sdbfs/fd-calib
-placeholder
\ No newline at end of file